Search

In Stock

Critical SF6 Point Apparatus

Appareil à point critique SF6, Integrated LED Illumination & Magnification Appareil de précision, Facilitates the high-contrast Analysis of critical opalescence and meniscus disappearance, allowing students to understand phase-state boundaries.

High-Resolution Thermostatic Control allows for the accurate Application of van der Waals equations during isothermal compression and expansion exercises.

Transparent Pressure Chamber supports the Synthesis of empirical data regarding supercritical fluid states and density fluctuations.

₹18,540.00

Quick Answer: The SF6 critical point apparatus is a pressure-rated cell containing sulfur hexafluoride, used to observe the critical point, where the boundary between liquid and vapour disappears. Because the critical temperature of SF6 is only a little above room temperature, the transition can be reached with gentle heating in a teaching laboratory.

What Happens at the Critical Point

Below its critical temperature, SF6 in a closed cell can exist as liquid and vapour together, separated by a visible meniscus. As the cell is warmed the liquid expands and becomes less dense, while more molecules enter the vapour, which becomes denser. At the critical point the two densities become equal, surface tension falls to zero and the meniscus fades and vanishes. Above that temperature there is no distinction between liquid and gas, only a single supercritical fluid.

Just before the meniscus disappears the cell often turns milky or brownish. This is critical opalescence: large fluctuations in density scatter light strongly. On cooling the sequence runs in reverse, and a fog of droplets appears throughout the cell before a new meniscus forms, a vivid demonstration that the liquid-gas transition has a natural end point.

Why Sulfur Hexafluoride Is Used

Sulfur hexafluoride has a critical temperature of about 45.5 degrees Celsius and a critical pressure of about 37.6 bar. The temperature is easy to reach with a warm water bath, and the pressure, while high, can be contained in a cell built for the purpose. The gas is non-flammable and chemically inert under these conditions, which is why it is widely chosen for teaching the critical state instead of carbon dioxide, whose critical point needs a much higher pressure.

Where the SF6 critical point apparatus allows the volume to be changed, isotherms of pressure against volume can be recorded at several temperatures, reproducing the classic Andrews curves: a flat two-phase region that shrinks as the temperature rises and becomes a point of inflection at the critical temperature.

Care & Handling

  • Treat the cell as a pressurised vessel: protect it from knocks and never heat it beyond the range in its instructions
  • Heat and cool slowly in a water bath so the whole cell stays at an even temperature
  • Use eye protection and keep a screen between the cell and observers when heating
  • Do not attempt to refill or vent the gas; SF6 is a potent greenhouse gas and needs specialist handling

Specifications

Item Critical point apparatus filled with sulfur hexafluoride (SF6)
Physical constants of SF6 Critical temperature about 45.5 degrees Celsius; critical pressure about 37.6 bar
Observations Disappearing meniscus, critical opalescence, supercritical fluid
Heating Water bath or thermostat around the cell
Cell design, gauge and volume adjustment Confirm at enquiry

Experiments and Topics

  • Observing the disappearance of the liquid-vapour meniscus
  • Demonstrating critical opalescence
  • Recording pressure-volume isotherms where the design allows
  • Linking real-gas behaviour to the van der Waals equation

Why Choose LabEquip

University physics and physical chemistry departments choose this apparatus because it brings the critical state within reach of an ordinary water bath. The same phase-change ideas reappear in the demonstration heat pump, where a refrigerant boils and condenses in every cycle; see more physics lab equipment and contact LabEquip to confirm the cell design and accessories.

Frequently Asked Questions

Why does the meniscus disappear at the critical point?

As the temperature rises the liquid becomes less dense and the vapour more dense. At the critical point the two densities are equal and surface tension vanishes, so there is no longer a boundary between two phases.

What causes critical opalescence?

Close to the critical point the fluid cannot settle on a single density, and regions of slightly different density form and dissolve constantly. These fluctuations are large enough to scatter light, giving the cell a milky appearance.

Why is SF6 chosen instead of carbon dioxide?

Its critical temperature is easy to reach with warm water and its critical pressure is roughly half that of carbon dioxide, so the cell does not have to withstand such high pressures. It is also non-flammable and chemically stable.

Is the apparatus safe for students?

It is designed to contain the pressure, but it remains a pressurised vessel. Use it under supervision, heat it only as described in its instructions, wear eye protection and keep a safety screen in place.

What does the experiment teach about real gases?

It shows that the ideal gas model breaks down at high density, where attractions between molecules allow liquefaction. The critical point marks the temperature above which no pressure can liquefy the gas.

Why is SF6 an environmental concern?

It is a very potent and long-lived greenhouse gas. A teaching cell holds only a small amount, but it should never be vented, and an apparatus at the end of its life should be returned or disposed of through a specialist.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)