Search

In Stock

Constant Level Tank

Corrosion-Resistant Metallic Construction: Fabricated from heavy-gauge brass or copper with a passivated finish to prevent oxidation and mineral scaling during prolonged exposure to aqueous solutions.

Triple-Port Hydraulic Architecture: Features precision-aligned inlet, outlet, and overflow tubes designed to facilitate rapid air-bubble clearance and maintain an instantaneous equilibrium for uninterrupted steady-state flow demonstrations.

$4.23

Quick Answer: The Constant Level Tank is a small water reservoir with an overflow that holds its water surface at a fixed height, so the water it supplies flows out under a steady pressure head. Physics laboratories use the constant level tank for the capillary-flow (Poiseuille) viscosity experiment and for continuous-flow calorimetry.

How a Constant Level Tank Holds the Head Steady

Water enters the tank from a tap or a raised reservoir slightly faster than the experiment draws it off. The surplus spills out through an overflow tube set at a fixed height, so the free surface cannot rise above that level, and because the inflow always exceeds the outflow it cannot fall either. The outlet near the base of the tank therefore delivers water under a constant head, the vertical height between the water surface and the point where the water leaves the apparatus.

A falling level would make the flow rate drop steadily during a timed collection, so that the volume measured would not match a single pressure. With the head fixed, the flow settles to one steady value that can be measured by collecting water for a known time. Mounting the tank on a stand or clamp at different heights gives a series of heads for the same experiment.

Experiments That Need a Steady Head

  • Supplying water at a steady head for the viscosity of water by Poiseuille’s capillary-flow method
  • Feeding a steady flow to the Callendar and Barnes apparatus for specific heat capacity
  • Investigating how flow rate through a tube changes with pressure head
  • Demonstrating the overflow principle used in water supply and laboratory reservoirs

Specifications

Type Constant level (constant head) water tank
Principle Overflow outlet holds the water surface at a fixed height
Connections Inlet, overflow outlet and supply outlet for rubber tubing
Mounting On a laboratory stand or bracket at the height required
Material, capacity and outlet sizes Confirm at enquiry

Setting Up for Poiseuille’s Method

For the viscosity of water by capillary flow, the outlet of the constant level tank is joined with rubber tubing to a horizontal capillary tube held in a capillary tube clamp. Water flows from the capillary into a beaker, and the volume collected in a measured time gives the rate of flow. The head is the height of the tank water surface above the axis of the capillary.

Poiseuille’s equation relates the viscosity to the pressure difference, the fourth power of the capillary radius, the flow rate and the capillary length. Keeping the head small keeps the flow streamline, which the equation requires.

Care & Handling

  • Run water through the tank and tubing before readings to clear trapped air bubbles.
  • Clamp the tank firmly and level so that the overflow lip sits horizontal.
  • Lead the overflow water to a sink with tubing so that the bench stays dry.
  • Empty and rinse the tank after use, and let it dry to prevent scale or algae.

Why Choose LabEquip

Physics laboratories buy the constant level tank as the water supply for viscosity and continuous-flow practicals. LabEquip lists it in the physics equipment category, and questions about matching the tank outlets to your existing tubing can be sent to our team via the contact page.

Frequently Asked Questions

Why does the water level in the tank stay constant?

Water is fed in faster than the experiment uses it, and the extra spills away through the overflow at a fixed height. The surface can neither rise above the overflow nor fall below it while the supply keeps running.

How is the pressure head measured?

Measure the vertical height from the water surface in the tank to the outlet of the apparatus, for example the axis of a capillary tube, with a metre rule. The pressure difference is that height times the density of water times the acceleration due to gravity.

Can the head be changed during an experiment?

Yes. Raising or lowering the tank on its stand changes the head. Taking readings at several heads and plotting flow rate against head checks that the flow is streamline, since the graph should be a straight line.

Why must the flow through a capillary be kept slow?

Poiseuille’s equation applies only to streamline flow. A large head drives water fast enough to become turbulent, which reduces the flow rate below the predicted value and gives a wrong viscosity.

What should be done about air bubbles in the tubing?

Let water run through the tank, tubing and capillary for a while before readings, squeezing the tubing gently to release trapped air. A bubble in a narrow tube restricts the flow and makes the readings erratic.

Which tubing connects the tank to other apparatus?

Flexible rubber or silicone tubing that fits snugly on the outlets is used, with a pinch clip to start and stop the flow. Keep the tubing short and free of kinks so it adds little resistance.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)