Search

In Stock

Callendar & Barnes’ Apparatus (Continuous Flow)

Integrated Borosilicate Glass Flow Path: Features a vacuum-jacketed, precision-bore glass tube housing a non-inductive heating element, minimizing radial heat loss and ensuring laminar fluid flow for high-precision temperature differential measurements.

Multi-Point Sensor Connectivity: Equipped with high-conductivity terminal blocks for external voltmeter and ammeter integration, facilitating the simultaneous monitoring of electrical power input and steady-state thermal gradients across the inlet and outlet ports.

₹1,624.00

Quick Answer: The Callendar and Barnes’ Apparatus (Continuous Flow) measures the specific heat capacity of a liquid, usually water, by heating a steady stream of it with an electric heater and reading the inlet and outlet temperatures. Because every temperature is steady, no calorimeter correction is needed, and a second run at a different flow rate eliminates heat loss.

Continuous-Flow Calorimetry

In the Callendar and Barnes continuous flow apparatus the liquid runs at a constant rate through a narrow glass tube that contains an electric heating element along its axis. A thermometer at each end of the tube reads the temperature of the liquid entering and leaving, and the tube is usually enclosed in an outer jacket that cuts down heat loss to the room. Water for the experiment is supplied from a constant level tank so that the flow does not change while readings are taken.

After a short time the outlet temperature stops changing. From then on the electrical energy supplied each second, voltage times current, equals the heat carried away by the flowing water each second plus a small, steady heat loss. Since nothing in the apparatus is still warming up, the heat capacity of the tube and heater plays no part in the calculation, which is the main advantage of the continuous-flow method.

Eliminating the Heat Loss

Two runs are made. In the first, with flow rate m1 per second and electrical power V1 times I1, the temperature rise is noted. For the second, the flow is changed to m2 and the power adjusted until the same temperature rise is obtained. Because the temperatures are the same, the heat lost each second is the same in both runs and cancels when the equations are subtracted: specific heat equals (V1 I1 minus V2 I2) divided by ((m1 minus m2) times the temperature rise).

The flow rate is measured by collecting the outflow in a weighed beaker for a timed interval. Careful collection and timing matter as much as the electrical readings.

Specifications

Type Continuous-flow apparatus for specific heat capacity of a liquid
Heating Electric heating element inside the flow tube
Readings Inlet and outlet temperatures, voltage, current, flow rate
Water supply Steady flow, normally from a constant level tank
Heater rating and thermometers Confirm at enquiry

Where the Method Is Taught

  • Determining the specific heat capacity of water by the continuous-flow method
  • Showing how a second run cancels an unknown heat loss
  • Undergraduate heat practicals that combine electrical and thermal measurements
  • Comparing the result with the method of mixtures using a calorimeter

Care & Handling

  • Start the water flowing before switching on the heater, and switch off the heater before stopping the flow.
  • Keep electrical connections dry and away from the water outlet and collecting beaker.
  • Use only the low-voltage supply and settings given in the instructions supplied with the apparatus.
  • Drain the tube after use and support the glass along its length when storing it.

Why Choose LabEquip

Colleges and senior physics laboratories buy the Callendar and Barnes apparatus for the continuous-flow experiment, usually together with a constant level tank to steady the flow. LabEquip lists both within its physics equipment category, and the electrical details for your supply can be confirmed by our team through the contact page.

Frequently Asked Questions

What does the continuous flow method measure?

It measures the specific heat capacity of a liquid, most often water. The energy supplied electrically to a steady stream of the liquid is compared with the mass flowing per second and the rise in its temperature.

Why is no calorimeter correction needed?

Once the outlet temperature is steady, the tube, heater and thermometers are no longer warming up, so they take in no further heat. All the energy goes into the flowing water or into the steady heat loss.

How are heat losses removed from the result?

The experiment is repeated at a different flow rate with the power adjusted to give the same temperature rise. The heat lost each second is then the same in both runs and cancels when the two equations are subtracted.

Why is a constant level tank used with this apparatus?

The method assumes a perfectly steady flow. Feeding the tube from a tank whose water level is held fixed by an overflow keeps the pressure, and so the flow rate, constant throughout the readings.

What electrical precautions apply to this apparatus?

Use the supply recommended for the apparatus, make sure water is flowing before the heater is switched on, and keep wiring and meters away from spills. Switch off and disconnect before draining or dismantling the tube.

Can liquids other than water be tested?

In principle any liquid that flows steadily and does not attack the tube or heater can be tested, but most teaching use is with water. Other liquids are harder to supply in the volumes needed and to dispose of afterwards.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)