Quick Answer: The Compass, Mariner’s / Navigating, is a navigation compass of the kind used on ships, in which the magnetised needle turns a card marked with the compass points and degrees. In schools the mariner’s navigating compass is used to teach bearings, the points of the compass and the difference between magnetic and true north.
How a Mariner’s Compass Differs from a Plotting Compass
A plotting compass has a bare needle and no scale, because its job is to show the direction of a field at one point. A mariner’s compass is built to read directions. Its magnet is attached beneath a circular card, the compass rose, printed with the cardinal and intermediate points and usually a degree scale, so the whole card turns until its north mark points to magnetic north. A fixed reference mark on the bowl, the lubber line, stands for the ship’s heading, and the course is read where the card meets that line.
On ships the bowl is often liquid-filled to damp the swing of the card and slung in gimbals so it stays level as the vessel rolls. Whether a particular teaching model has these features should be checked, but the reading principle is the same.
Navigation Lessons
- Teaching the points of the compass and three-figure bearings
- Taking bearings of landmarks in the school grounds for map work
- Showing magnetic variation and how navigators correct for it
- Demonstrating deviation caused by nearby iron and steel
- Linking the Earth’s magnetic field to the history of navigation
Variation and Deviation
A navigating compass points to magnetic north, not true north. The angle between them, called variation or declination, changes from place to place and slowly over the years, and navigators add or subtract it to convert a compass course into a true one. Students can find the local value on a current map or chart and apply it to their own readings.
Iron and steel close to the compass, and electrical equipment, pull the card away from magnetic north; this error is called deviation. Placing a steel object near the compass in class shows the effect clearly and explains why ships’ compasses are mounted away from steelwork and corrected with small magnets.
Specifications
| Type | Mariner’s (navigating) magnetic compass |
| Reading | Compass card with points of the compass, read against a lubber line |
| Use | Taking bearings and steering a course |
| Teaching topics | Bearings, magnetic variation and deviation |
| Liquid damping, gimbal mounting and size | Confirm at enquiry |
Care & Handling
- Keep the compass level and away from magnets, steel cupboards and electrical equipment.
- Store it in its box so the card and pivot are protected from knocks.
- If the bowl is liquid-filled, keep it out of strong sunlight and frost, and report any bubble that appears.
- Clean the glass or cover with a soft dry cloth only.
Why Choose LabEquip
Physics and geography departments buy the mariner’s compass for lessons that link magnetism to navigation and map work. A compass needle on stand makes a good companion for showing the Earth’s field, and LabEquip’s physics equipment category holds the plotting compasses and magnets. Our team can be contacted through the contact page.
Frequently Asked Questions
How is a mariner’s compass read?
The card turns with the magnet until its north mark points to magnetic north. The direction in which the ship or the user is heading is read on the card where it meets the fixed lubber line on the bowl.
What is the difference between magnetic north and true north?
True north is the direction of the geographic North Pole; magnetic north is the direction a compass points, which depends on the Earth’s magnetic field. The angle between them, the variation, differs from place to place.
What causes deviation in a ship’s compass?
Iron and steel in the ship’s structure and nearby electrical equipment create their own magnetic fields, which pull the compass card away from magnetic north. Ships correct for this with compensating magnets and a deviation card.
Why are some navigating compasses filled with liquid?
The liquid slows the swing of the card so that it settles quickly and does not jump about as a vessel pitches and rolls. It also supports some of the weight of the card and reduces wear on the pivot.
Can a mariner’s compass be used to plot magnetic field lines?
Not well. Its card and magnet are too large to show the field direction at a single point. Small plotting compasses are used for field lines; the mariner’s compass is for reading directions.
How can students practise bearings with this compass?
Stand in an open area away from steel, align the lubber line with a landmark and read the bearing on the card. Repeat for several landmarks and plot them on a map to check the results.
Last Updated: October 2026










Reviews
There are no reviews yet.