Search

In Stock

COMPASS FOR DRAWING MAGNETIC FIELD

Magnetized Needle with Smooth Pivot: Ensures sensitive and accurate alignment along magnetic field lines.

Graduated Base for Measurement: Facilitates precise plotting and recording of magnetic field orientation and intensity.

₹335.00

Quick Answer: The Compass for Drawing Magnetic Field is a miniature magnetic compass whose needle aligns with the local field, so moving it step by step across a sheet of paper lets students draw field lines. It is used to record the field around current-carrying wires, coils and permanent magnets.

Fields Around Currents

This compass comes into its own when the source of the field is an electric current. A straight wire is passed vertically through a hole in a horizontal card and connected to a low-voltage supply. With the current flowing, the compass is placed on the card a short distance from the wire, the needle’s direction is marked with two dots, and the compass is moved on so that its tail sits on the last dot. The line that builds up closes on itself as a circle around the wire, a field shape no permanent magnet can produce.

Repeating the plot further out gives a larger circle, and the needle swings less firmly because the field weakens with distance. Reversing the current reverses the direction of every arrow drawn on the circles. That is the result Hans Christian Ørsted’s 1820 observation pointed to: an electric current has a magnetic field whose direction depends on the direction of the current.

Field Patterns Drawn With It

  • Concentric circular field around a straight current-carrying wire
  • Field of a circular coil and the direction at its centre
  • Field around a solenoid compared with a bar magnet
  • Fields of single magnets and of pairs of like and unlike poles
  • Checking the right-hand grip rule for the direction of field lines

Coils, Solenoids and the Earth’s Field

The same compass maps the field of a flat circular coil, where lines circle each side of the loop and run straight through its centre, and of a solenoid, where the outside field resembles that of a bar magnet. Away from strong sources the Earth’s own field takes over, so before plotting, students should note the direction the needle points with the current switched off. A weak current gives a pattern distorted by the Earth’s field; increasing the current briefly, or plotting close to the conductor, keeps the drawing true to the current’s field.

Specifications

Item Small magnetic compass for field plotting
Indicator Magnetised needle free to turn on a pivot
Use Drawing field lines point by point on paper or card
Typical set-up Card or board with a wire, coil or magnet and a low-voltage DC supply
Case type, size and pack quantity Confirm at enquiry

Care & Handling

  • Store the compasses away from magnets and current-carrying coils so their needles keep the correct polarity.
  • Keep them flat in a tray between lessons; dropping a compass can dent the pivot and make the needle stick.
  • Check each compass against a magnet of known polarity at the start of a practical.
  • Wipe the cover with a soft cloth only; abrasive cleaners scratch it and make the needle hard to read.

Why Choose LabEquip

Teachers usually order these in sets so that each pair of students can plot a field while the current is on for only a short time. LabEquip lists this compass in its Physics Equipments category; for a demonstration coil to plot around, see the circular coil for demonstrating field lines. Send class numbers through the contact page.

Frequently Asked Questions

Why does the field around a straight wire form circles?

Each part of the current produces a field at right angles both to the wire and to the line joining the wire to the point. Around a long straight wire those directions join up into circles centred on the wire.

How do I find the direction of the field around a wire without a compass?

Use the right-hand grip rule: grip the wire with the right hand so the thumb points along the conventional current, and the curled fingers show the direction of the field lines. The compass then confirms the prediction.

Why should the current be switched on only while plotting?

Plotting needs a fairly large current so that the wire’s field outweighs the Earth’s, and a large current heats thin wires and drains cells. Switching on only while marking each point keeps the circuit cool and the supply steady.

Why does the needle settle in a different direction far from the wire?

The field of the wire weakens with distance, so far away the Earth’s field becomes comparable and the needle points along the combination of the two fields. Plotting close to the wire, or using a larger current, keeps the pattern clear.

Can the compass be used together with iron filings?

Yes, the two methods complement each other. Iron filings show the overall shape of the field quickly but not its direction; the compass adds the direction and gives a neat drawing for notebooks.

What should I do if a compass needle points the wrong way?

A strong magnet can reverse the magnetism of a small needle. Set that compass aside and test it against a known magnet; a reversed needle can sometimes be corrected by stroking it with a strong magnet, but replacing it is more reliable.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)