Quick Answer: Communicating vessels are a set of tubes or containers of different shapes and widths joined to a common channel at the bottom. When liquid is poured into communicating vessels it settles at the same horizontal level in every branch, showing that the pressure in a connected liquid at rest depends only on depth.
Why One Level Appears Everywhere
In communicating vessels the liquid is one connected body. At any horizontal level inside it the pressure must be the same, otherwise liquid would flow from the higher-pressure region until the difference vanished. Each open surface is at atmospheric pressure, and the pressure below a surface rises by ρgh with depth, so every surface must sit at the same height above the joining channel.
The shape and width of each branch play no part. A wide branch holds more liquid, but its extra weight is carried by its own walls and base, not passed sideways to its neighbours. Students who expect the wide tube to push the liquid higher in the narrow one are usually surprised by how exactly the levels agree.
When the Levels Differ
Two situations break the rule, and both teach something. In a very narrow branch, capillary action lifts a wetting liquid above the common level, because surface tension then adds an upward force comparable with the weight of the column. And if two liquids that do not mix are used, such as water and oil, the levels settle at different heights: the column of the less dense liquid stands taller, so that ρ₁h₁ = ρ₂h₂ above the interface.
Measuring those two heights is a simple way to find the density of oil relative to water.
Demonstrations
- Showing that liquid levels are equal whatever the shape of each branch
- Explaining water towers, garden hoses and the builders’ water level
- Comparing densities of two immiscible liquids from column heights
- Introducing canal locks and how they raise and lower boats
Specifications
| Product | Communicating vessels demonstration set |
| Form | Branches of different shapes joined at a common base channel |
| Principle | Equal pressure at equal depth in a connected liquid at rest |
| Typical liquid | Water with a little food colouring |
| Material, number of branches and stand | Confirm at enquiry |
Care & Handling
- Pour slowly down one branch so air is pushed ahead of the liquid and not trapped in the base
- Empty and rinse after use; dried colouring leaves rings that make levels hard to read
- Stand the set on a level surface before comparing heights
- Handle by the base, not the branches, and store upright
Why Choose LabEquip
Primary, middle and secondary schools use communicating vessels as an early, visual introduction to fluid pressure, often alongside a capillarity study device to show the one exception. LabEquip can supply sets for each bench and further physics lab equipment for hydrostatics; contact LabEquip with the number of sets.
Frequently Asked Questions
Why does the liquid reach the same height in every vessel?
The pressure at a given depth in a connected liquid at rest is the same everywhere. Since every surface is open to the same atmosphere, the only way to balance the pressures is for all the surfaces to sit at the same level.
Does the width of a vessel change the level?
No. A wider branch holds more liquid, but the extra weight is supported by its own walls and base. Only the vertical depth sets the pressure, so a wide branch and a thin branch show the same level.
Why can a very narrow tube show a higher level?
In a tube only a millimetre or so wide, surface tension pulls a wetting liquid up the walls. That capillary rise is added to the common level, so the narrow tube reads higher.
How can two liquids be compared in connected tubes?
Pour water into a U-shaped pair of branches, then add oil to one side. Measure each column above the oil-water boundary; the density ratio equals the inverse ratio of the heights.
Where is the principle used outside the lab?
A builders’ water level, a clear hose filled with water, marks equal heights at two ends of a room. Water towers supply taps at lower levels, and the water gauge on a kettle or tank follows the same rule.
How is the set filled without trapping air?
Tilt the set slightly and pour steadily into one branch so the liquid flows along the base channel and pushes the air out through the other openings. Tap the base gently to free any remaining bubbles.
Last Updated: October 2026










Reviews
There are no reviews yet.