Search

In Stock

COIL FOR DEMONSTRATING EDDY CURRENTS

Precisely Wound Conductive Coil: Generates uniform magnetic flux for consistent eddy current visualization.

Sturdy Insulated Mounting Frame: Maintains coil alignment and stability during repeated experimental demonstrations.

$12.69

Quick Answer: The Coil for Demonstrating Eddy Currents is an electromagnet coil whose changing or moving magnetic field induces swirling currents inside nearby pieces of metal. Physics teachers use a coil for demonstrating eddy currents to show magnetic damping, the repulsion of rings and plates, and the heating of conductors.

What Eddy Currents Are

Whenever the magnetic flux through a piece of metal changes, an emf is induced around every closed path inside it. In a solid conductor those paths are not confined to a wire, so the current flows in closed whirls, the eddies that give the effect its name. By Lenz’s law, the eddy currents always flow in the direction that opposes the change producing them.

That opposition shows up in two ways. If the metal is moving through a steady field, the eddy currents produce a force that slows it down: magnetic damping. If the field itself is changing, as when the coil carries alternating current or is switched on suddenly, the eddy currents create their own field that repels the coil’s, and their energy is dissipated as heat in the metal’s resistance.

Demonstrations With the Coil

Coils sold for this purpose are used in several classic set-ups, and which accessories are included should be confirmed before ordering. A metal plate swinging as a pendulum between the poles of the energised coil and its core (Waltenhofen’s pendulum) stops almost at once, while the same plate cut into comb-like slots swings on, because the slots break the eddy paths. An aluminium ring placed over an iron core in the coil is flung upwards when the current is switched on, and a ring with a cut does not move. On an alternating supply, a thick metal plate held near the coil becomes noticeably warm, the principle of induction heating.

Teaching Uses

  • Demonstrating Lenz’s law through magnetic damping of a moving conductor
  • Comparing solid and slotted plates to show why transformer cores are laminated
  • Showing repulsion of a conducting ring by a changing field
  • Explaining induction cooktops, metal detectors and eddy current brakes on trains and rides
  • Introducing energy losses in electrical machines

Specifications

Apparatus Coil for eddy current demonstrations
Principle Electromagnetic induction and Lenz’s law
Effects shown Magnetic damping, repulsion of conductors, induction heating
Supply DC for damping demonstrations; AC for repulsion and heating, within the coil’s rating
Core, pendulum plates and rings included Confirm at enquiry

Care & Handling

  • Never leave the coil energised unattended; continuous current, especially on AC, heats the winding.
  • Keep watches, phones and cards away from the coil and iron core when it is switched on.
  • Stand clear of the ring’s path in the jumping-ring demonstration and never look down over the core.
  • Check the insulation of the winding and the connecting leads before each use.

Why Choose LabEquip

Teachers who already demonstrate induction with a magnet and coil add this apparatus to show the less obvious side of induction: currents inside solid metal. It is listed in LabEquip’s physics range and complements the electromagnetic ring launcher. Ask which accessories suit your syllabus through our contact page.

Frequently Asked Questions

Why does a slotted plate swing freely while a solid plate stops?

The slots cut across the paths the eddy currents would follow, so only small currents can flow in each finger of metal. With weaker currents the opposing force is much smaller, and the plate swings almost as if the magnet were off.

Why does the ring jump when the coil is switched on?

Switching on makes the flux through the ring grow rapidly, inducing a current in the ring that, by Lenz’s law, creates a field opposing the coil’s. The two fields repel and the ring is pushed up. With alternating current the flux keeps changing, so a ring can be held floating above the coil.

Why does a cut ring not jump?

A cut ring has no closed path, so although an emf is induced around it, no current can flow. Without current there is no opposing field and no force.

What practical devices use eddy currents?

Induction cooktops and induction furnaces use them for heating; trains, roller coasters and some exercise bikes use eddy current brakes; metal detectors and coin-sorting machines sense the eddy currents induced in metal objects.

Why are transformer cores laminated?

A solid iron core would carry large eddy currents and waste energy as heat. Building the core from thin insulated sheets breaks up the eddy paths and reduces the loss, which is the same effect the slotted plate demonstrates.

Does the metal have to be magnetic?

No. Eddy currents need only an electrical conductor. Aluminium and copper, which are not attracted to magnets, show strong effects because of their low resistance.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)