Search

In Stock

Circular Dynamometer with Magnet

Dynamomètre circulaire avec aimant, Factory-Calibrated Internal Spring Supports the rigorous Application of Hooke’s Law with repeatable precision, reinforcing evidentiary-grade laboratory reporting.

High-Contrast Needle Indicator Minimizes parallax error during the Analysis of force magnitude, ensuring data parity across multiple student workstations.

$18.61

Quick Answer: The circular dynamometer with magnet is a dial force meter with a magnetic back that holds it on a vertical steel board. Teachers use it to build force experiments on the board, such as three forces in equilibrium, where the whole class can see both the readings and the angles.

Forces You Can Draw Around

Fix two magnetic dynamometers high on a steel board, tie their strings to a small ring and hang a known weight from the ring. When everything settles, three forces act on the ring and balance. Because the strings lie flat against the board, their lines can be drawn straight onto it, the angles measured with a board protractor, and the triangle or parallelogram of forces constructed in front of the class.

The board makes a surprising result easy to see. If the two strings each make 30 degrees with the vertical while together supporting 10 N, each meter reads about 5.8 N; spread them to 60 degrees from the vertical and each reads the full 10 N. A washing line or a tightrope behaves the same way: the straighter it is pulled, the greater the tension needed.

Moments and Slopes on the Board

With a beam pivoted on the board, a magnetic dynamometer pulling at different distances from the pivot shows the principle of moments, and the force needed falls as the distance grows. On a board-mounted ramp, the meter measures the component of a trolley’s weight along the slope, which students can compare with mg sinθ.

The magnet holds the meter’s body while the hook measures the pull, so its grip must exceed the force along the board. Keep pulls moderate, use a clean steel surface, and check that the body has not crept before each reading.

Applications

  • Three forces in equilibrium and the triangle of forces
  • Adding vectors with the parallelogram rule
  • Principle of moments with a board-mounted beam
  • Component of weight along a slope

Specifications

Product Circular-dial dynamometer with magnetic mounting
Mounting Magnet on the body, for steel (ferromagnetic) boards
Display Pointer on a round dial graduated in newtons
Typical uses Equilibrium of forces, moments and slopes on a vertical board
Range and magnet holding force Confirm at enquiry

Care & Handling

  • Slide the meter off the board rather than prising it, to protect the dial
  • Keep the magnet face clean and free of steel filings
  • Store meters apart from each other, magnet faces protected
  • Keep loads within the dial range

Why Choose LabEquip

Teachers who demonstrate vectors and equilibrium to a full class use the circular dynamometer with magnet because the readings and angles are visible from the back of the room. For bench work see the circular dynamometer for students, and the pulley on rod adds a change of direction; contact LabEquip for sets, or browse physics lab equipment.

Frequently Asked Questions

How is the three-force equilibrium experiment set up on the board?

Fix two magnetic dynamometers high on the board, attach their strings to a small ring and hang a mass from the ring. Mark the string lines on the board, read both dials and construct the triangle of forces.

Why do the readings rise as the strings are spread wider?

Each string must still supply half of the upward support, but more of its pull is now sideways. With each string at 60 degrees from the vertical, each one reads the full weight being supported.

Can the meter slide when the force is large?

Yes. The magnet’s grip depends on the board and on how hard the meter is pulled along the surface. Keep pulls moderate, use a clean steel board and check the body has not crept before each reading.

Will it hold on any whiteboard?

Only on boards with a steel surface. Many whiteboards are steel-faced, but glass, aluminium and wooden boards will not hold a magnet.

How is it different from the student circular dynamometer?

It measures force in the same way, but the magnetic back lets it be fixed on a vertical board for demonstrations, so the force lines and angles can be drawn directly behind the strings.

What range does the dynamometer have?

The range and the magnet’s holding force can be confirmed at enquiry. Choose a range a little above the largest load you plan to hang so the pointer moves well across the dial.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)