Search

In Stock

Circular Dynamometer for Students

Dynamomètre circulaire élève enables student Application of calibration protocols, reinforcing evidentiary-grade accuracy in experimental data synthesis.

Dual-Unit Scale (Metric/SI) supports technical Analysis of weight-to-mass conversions during gravitational constant (g) verification trials in vocational physics.

Impact-Resistant Transparent Cover Allows for the clear Evaluation of internal spring mechanics while protecting the needle assembly during high-cadence laboratory rotations.

₹1,285.00

Quick Answer: The circular dynamometer for students is a force meter in which a spring drives a pointer around a round dial marked in newtons. Its large, clear dial makes the circular dynamometer easy for a group to read when measuring weights, friction and balanced forces.

From Spring Stretch to Dial Reading

Pulling on the hook stretches a spring inside the body. In the usual design a small toothed rack on the spring turns a pinion on the pointer spindle, so a short stretch becomes a long sweep of the pointer around the dial. Spreading the scale around a circle makes the divisions wider than on a short straight scale, and a whole group around the bench can see the reading at once.

Like any force meter, the dial reads the tension in the line attached to the hook, with the body anchored or held against an equal and opposite pull. That makes it a convenient way to show Newton’s third law: two meters hooked together and pulled apart always read the same.

Group Experiments with the Dial

Hanging a series of known masses and plotting the force against the mass gives a straight line whose gradient is the gravitational field strength, close to 9.8 N/kg. In a friction investigation a block is dragged at steady speed while masses are added to it; plotting the friction force against the block’s weight gives a line whose gradient is the coefficient of friction.

The dial is also useful for checking assumptions in other experiments, for example that the tension is the same on both sides of a light pulley, or that a rubber band, unlike the spring inside the meter, does not stretch in proportion to the load.

Specifications

Product Circular-dial dynamometer (force meter) for student use
Display Pointer on a round dial graduated in newtons
Usual mechanism Spring with rack and pinion driving the pointer
Typical experiments Weight against mass, friction, forces in equilibrium
Range and scale divisions Confirm at enquiry

Practicals

  • Finding the gravitational field strength from force against mass
  • Measuring the coefficient of friction from a force against weight graph
  • Showing equal and opposite forces with two meters hooked together
  • Checking tension on both sides of a pulley

Care & Handling

  • Keep loads within the top of the dial scale
  • Pull along the line of the hook, never sideways
  • Protect the dial window from scratches when storing
  • Let the pointer return to zero slowly after removing a load

Why Choose LabEquip

Teachers choose a circular dynamometer for students when groups need a force meter everyone around the bench can read. For board demonstrations see the circular dynamometer with magnet or add a magnetic support; contact LabEquip with the ranges you need, or browse physics lab equipment.

Frequently Asked Questions

What is the advantage of a circular dial over a straight scale?

The pointer sweeps a long arc for a short spring stretch, so the scale divisions are spread out and easy to read, and a group around the bench can see the reading at once.

How can students find the gravitational field strength with it?

Hang a series of known masses, record the force for each and plot force against mass. The gradient of the straight line is close to 9.8 N/kg.

How is the coefficient of friction found?

Drag a block at steady speed and record the force, then add masses to it and repeat. Friction plotted against the block’s weight gives a straight line whose gradient is the coefficient of friction.

Does the dynamometer read differently when held sideways?

It can, because the moving parts have weight. Set the pointer to zero with the meter held the way it will be used, using the zero adjuster if one is fitted.

Why should the pull be along the line of the hook?

A sideways pull makes the moving parts rub and puts part of the force across the spring instead of along it, so the meter under-reads and can be damaged.

Is this the same as the circular dynamometer with magnet?

It works the same way, but the magnetic version can also be fixed to a steel board for teacher demonstrations. The student version is intended for hand-held and bench use.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)