Search

In Stock

Calorimeter Vessel, Copper / Aluminum

Precision-Spun High-Purity Metal: Fabricated from oxygen-free copper or high-grade aluminum, these vessels feature uniform wall thickness and a polished finish, ensuring consistent thermal mass and minimal radiative heat loss during sensitive heat transfer observations.

Standardized Volumetric Geometry: Engineered to specific laboratory dimensions to fit standard insulating jackets and thermometer supports, facilitating seamless integration into multi-component thermodynamic systems for precise enthalpy and phase-change analysis.

Quick Answer: The Calorimeter Vessel, Copper / Aluminum, is the plain inner cup of a calorimeter, offered in either copper or aluminium. The calorimeter vessel holds the water or other liquid in heat-exchange experiments and can replace or add to the cups in existing calorimeter sets.

Copper or Aluminium: How the Two Compare

Both metals conduct heat well, which is the first requirement for a calorimeter: the vessel must reach the temperature of its contents almost immediately. Copper conducts better still and has the lower specific heat capacity, so copper vessels have long been the traditional choice in physics laboratories.

Aluminium has a specific heat capacity more than twice that of copper, which at first sight makes it the poorer choice. But aluminium is only about a third as dense, so a vessel of the same size and wall thickness is much lighter, and its total heat capacity can end up similar to, or even smaller than, that of a copper cup. What matters in the calculation is the vessel’s mass times its specific heat, so either metal works well provided the vessel is weighed and the right value is used.

Practical differences decide most orders. Aluminium vessels are lighter for students to handle and do not show the dark tarnish that copper develops, while copper is more resistant to alkaline solutions, which attack aluminium.

Where a Separate Vessel Is Useful

  • Replacing a dented or corroded cup in an existing calorimeter set
  • Providing extra vessels so that every group in a class can work at once
  • Comparing results obtained in copper and in aluminium vessels as an investigation
  • Holding liquid around an immersion heater in the electrical method for specific heat capacity

Specifications

Type Inner vessel (cup) for a calorimeter
Material options Copper or aluminium
Lid, jacket and stirrer Not part of the vessel; used from an existing set
Typical use Method of mixtures and electrical heating experiments
Sizes available Confirm at enquiry

Care & Handling

  • Weigh the empty vessel before each experiment rather than relying on a value written on it.
  • Use copper for alkaline liquids and avoid strong acids in either metal.
  • Rinse with clean water after use and dry thoroughly before stacking vessels together.
  • Avoid scouring the inner surface; a smooth inside is easier to dry and keeps its mass constant.

Why Choose LabEquip

School stores and college laboratories buy plain calorimeter vessels to keep their calorimeter sets complete and to give each group its own cup. A full arrangement such as the copper calorimeter with wooden box and stirrer is also available in our physics lab equipment range, and the metal and sizes needed can be agreed through the contact page.

Frequently Asked Questions

Should I choose a copper or an aluminium calorimeter vessel?

Either gives good results if its mass and the correct specific heat are used. Copper is traditional and resists alkalis better; aluminium is lighter and does not tarnish visibly. Many laboratories keep a few of each so students can compare.

Does the higher specific heat of aluminium spoil the results?

Not usually. Because an aluminium vessel is much lighter than a copper one of the same size, its total heat capacity is often similar. The correction for the vessel is calculated from its own mass, so it is accounted for either way.

Is a lid or stirrer included with the vessel?

The vessel is the plain inner cup. It is intended to be used with the jacket, lid and stirrer of an existing calorimeter set, or with ones bought separately.

Can the vessel be used for the electrical method of finding specific heat?

Yes. An immersion heater, thermometer and stirrer are placed in a weighed mass of liquid in the vessel, and the energy supplied is compared with the temperature rise. Keep electrical connections dry and outside the liquid.

Which liquids should not be used in an aluminium vessel?

Alkaline solutions such as sodium hydroxide attack aluminium, and acids attack both metals. Water and oils are safe in either. A reaction with the vessel would also add unwanted heat to the measurement.

Why should the vessel be weighed every time?

Small losses from cleaning or corrosion change the mass slowly, and the heat capacity of the vessel depends directly on its mass. Weighing it dry before each experiment takes a moment and removes a source of error.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)