Search

In Stock

Boyle’s Law Apparatus, Advanced with Oil

High-Stability Pressure Gauge: Equipped with a dual-scale Bourdon-style gauge (kg/cm² and PSI) mounted on a heavy-duty base for real-time monitoring of internal air pressure fluctuations up to 4 bar.

Integrated Oil Piston System: Utilizes a rotary screw-threaded plunger mechanism to displace oil into the graduated tube, allowing for smooth, incremental volume compression without the risk of pneumatic leakage or friction-induced heat.

₹1,720.00

Quick Answer: The Boyle’s Law Apparatus, Advanced with Oil, traps a column of air above oil in a sealed vertical glass tube; pumping air into the oil reservoir pushes the oil up and compresses the trapped air, while a pressure gauge gives the pressure and a scale beside the tube gives the volume. It verifies Boyle’s law without a mercury column.

How the Oil-Column Design Works

In the usual form of this advanced Boyle’s law apparatus, the lower end of a thick-walled glass tube opens into an oil reservoir, and the upper end is sealed so that a fixed mass of air is held above the oil. A non-return valve on the reservoir accepts a foot pump or hand pump, and a dial gauge connected to the reservoir shows the pressure. Pumping forces oil up the tube, shortening the air column; opening a release valve slowly lets the oil fall back.

Using oil rather than a dense liquid such as mercury removes the toxic-spill risk and lets the pressure be read from a dial rather than from a level difference. The oil column above the reservoir adds a small pressure of its own, which careful students correct for and most class work neglects. The volume is read from the scale as the length of the air column, valid because the tube bore is uniform.

Pressure is raised in steps, the oil allowed to settle and the air to cool back to room temperature, then the pair of readings taken. A plot of pressure against 1/V should be a straight line through the origin, provided absolute pressure is used. Check the dial markings: if the Bourdon gauge reads gauge pressure, add atmospheric pressure before plotting. The two-tube Boyle’s law apparatus is the alternative when readings below atmospheric pressure are also wanted. Gauge range, tube size and pump inclusion are not stated in the title.

Specifications

Law Boyle’s law at constant temperature
Working liquid Oil, as titled
Usual pressure read-out Dial pressure gauge on the oil reservoir
Volume reading Length of the trapped air column on a scale
Pressure source Foot pump or hand pump through a non-return valve
Gauge range, tube size and pump inclusion Confirm at enquiry

Applications

  • Verifying Boyle’s law in senior secondary and first-year college practicals without mercury
  • Demonstrating gas compression to a whole class, since the oil column is easy to see
  • Investigating how long trapped air takes to return to room temperature after a quick compression
  • Discussing gauge versus absolute pressure when processing the readings

Care & Handling

  • Release pressure slowly through the valve; a sudden release can froth the oil and draw bubbles into the tube.
  • Never pump beyond the top of the gauge scale, and wear eye protection while the apparatus is pressurised.
  • Keep the apparatus upright when moving it so that oil cannot run into the air column.
  • Top up only with the oil type intended for the set, and wipe spills promptly.
  • Store the apparatus with the pressure released.

Why Choose LabEquip

Schools and colleges moving away from mercury apparatus often choose the oil-column Boyle’s law set, because it gives clear, class-visible readings with a simple pump. Find it among our Physics Equipments and contact LabEquip to confirm the gauge and pump supplied.

Frequently Asked Questions

Why does this apparatus use oil instead of mercury?

Oil avoids the toxic vapour and spill hazards of mercury. The pressure is read from a gauge instead of from a level difference, so a dense liquid is not needed to keep the apparatus a manageable height.

Does the gauge reading need correcting?

Two corrections may apply. If the dial reads gauge pressure, add atmospheric pressure to get absolute pressure. The height of oil between the reservoir surface and the bottom of the air column also slightly reduces the pressure on the trapped air, a correction usually small enough to neglect in school work.

Why should I wait after each pumping step?

Compressing the air warms it slightly, raising its pressure. Waiting a minute or two lets it cool to room temperature, so each pair of readings is taken at the same temperature, as Boyle’s law requires.

Can this apparatus show pressures below atmospheric?

Not in its usual form, because the pump only adds air above the oil. For readings below atmospheric pressure, use a two-tube apparatus in which the open tube can be lowered beneath the closed one.

What pump is used with it?

A foot pump or a bicycle-type hand pump that fits the valve on the reservoir is normal. Pump gently in short strokes so the oil rises smoothly and the gauge can be read between strokes.

What kind of graph should students draw?

Plot absolute pressure against the reciprocal of the air-column length. A straight line through the origin confirms Boyle’s law, and the product of pressure and length should stay nearly constant from reading to reading.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)