Search

In Stock

Bimetallic Strip

Dual-Metal Construction: Combines metals with different expansion rates to clearly illustrate bending response to temperature changes.

Precision-Calibrated Strip: Uniform dimensions and high-quality metals ensure repeatable, accurate experimental results.

₹225.00

Quick Answer: The Bimetallic Strip is a compound bar made of two different metals joined face to face along their length, usually with a handle at one end. When the bimetallic strip is heated it bends, because one metal expands more than the other, giving a clear demonstration of unequal thermal expansion and the working principle of thermostats.

Why the Strip Bends

Each metal has its own coefficient of linear expansion. In a common combination such as brass and iron, brass expands noticeably more for the same rise in temperature. Because the two layers are fixed together and cannot slide, the only way the brass can become longer than the iron is for the whole strip to curve, with the brass on the outside of the curve. Cooled below room temperature, in ice water for example, the brass contracts more and the strip curves the other way.

The movement is large enough to see from the back of a classroom, which is why the strip is the usual first demonstration that different solids expand by different amounts. It also shows that expansion is reversible: as the strip returns to room temperature it straightens again.

From Demonstration to Thermostat

Fixing one end of the strip and placing a contact near the free end turns it into a temperature-operated switch. In a fire-alarm demonstration, the strip is wired with a low-voltage supply and a lamp or bell; when a flame warms the strip, it bends, touches the contact and completes the circuit. Electric irons, kettles, flasher units and dial thermometers, where a coiled strip turns a pointer, all rely on the same effect.

Demonstrations

  • Showing that different metals expand by different amounts on heating
  • Reversing the bend by cooling the strip in ice water
  • Building a fire-alarm circuit with a 6 V lamp that lights when the strip is heated
  • Explaining thermostats in irons and kettles and the coiled strip in dial thermometers

Specifications

Construction Two different metals bonded along their length
Common pairing Brass with iron or steel
Principle Unequal linear expansion causes bending
Heat source Spirit lamp or burner flame; ice water for cooling
Metals, length and handle type Confirm at enquiry

Care & Handling

  • Hold the strip by its handle only; the metal stays hot for some time after heating.
  • Heat along the length gently and evenly rather than holding one spot in the flame.
  • Do not try to straighten a hot strip by force; let it cool and recover on its own.
  • Keep the strip dry and store it flat so it is not bent permanently.

Why Choose LabEquip

Middle-school and secondary physics teachers use the compound bar in almost every heat unit, often alongside the ring and ball set. LabEquip lists it among its physics equipment, and class sets can be ordered through the contact page.

Frequently Asked Questions

Which way does a bimetallic strip bend when heated?

Towards the metal that expands less. The metal with the larger expansion ends up on the outside of the curve; for brass and iron, brass is on the outside.

What happens if the strip is cooled instead?

It bends the opposite way. The metal that expands more on heating also contracts more on cooling, so it ends up on the inside of the curve.

Why are the two metals bonded rather than just laid together?

Bonding stops the layers sliding over each other. Only when they are held together does the difference in expansion force the strip to curve.

How is the strip used in a thermostat?

One end is fixed and the free end carries or touches an electrical contact. As temperature changes, the bending opens or closes the contact, switching a heater or alarm on or off.

Is a bimetallic strip the same as a compound bar?

Yes. Compound bar is an older name for the same item. Both describe two metals joined along their length to show unequal expansion.

Can the strip be heated in a Bunsen flame?

Yes, by passing it through the flame along its length. Avoid holding one point in the hottest part of the flame for long, which can discolour or warp the strip.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)