Search

In Stock

Bell and Manual Vacuum Pump

Ensemble cloche et pompe à vide manuelle, Integrated Manual Reciprocating Pump provides tactile engagement with mechanical work and air displacement, supporting Analyze-level comprehension of pneumatic resistance and energy transfer.

Influence de la pression sur la température d'ébullition, Optically Clear High-Impact Chamber Facilitates high-visibility observation of internal specimen behavior (e.g., sound attenuation, boiling points) under reduced pressure, enabling student Evaluation of Boyle’s Law.

Precision Pressure Release Valve Expériences visuelles allows for controlled atmospheric re-pressurization, assisting in the Application of pressure differential theories during repeatable experimental trials.

₹1,075.00

Quick Answer: The bell jar and manual vacuum pump is a hand-operated vacuum set in which a bell-shaped jar is sealed onto a base and the air inside is drawn out with a hand pump. It is used for classic air-pressure demonstrations without an electric pump, from expanding balloons to sound fading in a partial vacuum.

Repeating the First Air-Pump Experiments

In the 1650s Otto von Guericke built one of the first air pumps, and soon afterwards Robert Boyle, working with Robert Hooke, used an improved pump and a glass receiver to see what happened to objects when the air was removed. They found that the ticking of a watch became faint, that a flame went out and that a bladder holding a little air swelled. A bell jar and manual vacuum pump let students repeat the spirit of those experiments on the bench.

The word bell in the product name refers to the bell-shaped jar, sometimes called a receiver, not to an electric bell. Its open rim sits on a flat base, and once a few strokes of the pump have reduced the pressure inside, the atmosphere presses the jar firmly down and seals it against the base.

Demonstrations

  • History of science lessons on Boyle’s and von Guericke’s air pumps
  • Showing that trapped air expands as the outside pressure falls
  • Sound and vacuum demonstrations with a battery buzzer
  • Practical work in rooms without a convenient mains supply

Getting a Good Seal

Most problems with hand-pumped bell jars come from leaks rather than from the pump. The rim and base should be clean and free of grit, a gasket or a thin film of vacuum grease must cover the whole contact line, and any tube between pump and base should fit tightly. Pumping steadily with full strokes, then closing the valve, holds the low pressure long enough for a demonstration.

Specifications

Item Bell jar with hand-operated vacuum pump
Operation Manual pumping; no power supply needed
Demonstrations Expansion of trapped air, boiling at reduced pressure, sound fading from a battery buzzer
Sealing Clean rim with a gasket or a thin film of vacuum grease
Jar material, size and pump type Confirm at enquiry

Care & Handling

  • Check the jar for cracks before each use; evacuated glass can implode if damaged
  • Clean grease and dust from the rim after each session
  • Let air back in gently before lifting the jar
  • Store the pump with its valves and seals free of dust

Why Choose LabEquip

A hand-pumped bell jar suits schools that want vacuum demonstrations anywhere in the building without an electric pump or trailing cables. Where pressure readings are needed, choose the vacuum bell jar with manual pump and pressure gauge; for faster evacuation the vacuum pump 10 L/min is an electric option, and more physics lab equipment sits in the category.

Frequently Asked Questions

Why is it called a bell?

The name describes the bell shape of the jar, known in older books as a receiver. It does not refer to an electric bell, although a sound source is often placed inside for the sound-in-vacuum demonstration.

Can a hand pump produce a complete vacuum?

No. Leaks, the dead space in the pump and vapour from any liquids limit how low the pressure goes. A partial vacuum is enough for classroom demonstrations, which depend on a large drop in pressure rather than none at all.

Why does a balloon in the jar get bigger?

The air sealed in the balloon keeps pushing outwards while the pressure around it falls. The balloon expands until the pressure of the gas inside drops to match its surroundings, as Boyle’s law predicts.

What sound source should be used inside?

A small battery buzzer or a wind-up alarm works well. Rest it on foam so that vibration is not passed through the base, otherwise students hear the sound through the solid parts instead of through the air.

Why did Boyle’s experiments matter?

They showed that air has a measurable pressure or spring, that sound needs a medium and that burning depends on air. They also set an early example of careful, repeatable experiments reported in detail.

Is a plastic bell jar safer than glass?

A clear plastic jar is lighter and less likely to shatter, which suits younger classes. Glass resists scratching and some solvents better, so the choice depends on how the jar will be used.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)