Search

In Stock

Vacuum Pump 10 L/min

Pompe à vide 10 L/min POMPÉCO, Continuous 10 L/min Displacement Facilitates precision filtration and evaporative cooling experiments, supporting Analyze-level chemistry modules regarding phase transitions.

Oil-Free Diaphragm Architecture Ensures a contaminant-free environment for sensitive gas law demonstrations, allowing students to evaluate pressure-volume relationships with high fidelity.

Ruggedized Compact Footprint Optimizes laboratory bench space during multi-cohort sessions, enabling students to apply vacuum techniques across diverse experimental physics and biology setups.

₹6,580.00

Quick Answer: The vacuum pump 10 L/min is an electric laboratory pump rated, as its name states, at 10 litres per minute, used to evacuate bell jars and small vessels for air-pressure demonstrations and to provide suction for vacuum filtration. It saves the effort of hand pumping when demonstrations are repeated through the day.

What 10 L/min Means in Practice

The flow rating tells how much air the pump moves each minute when it draws from atmospheric pressure. As the vessel empties, each litre of gas the pump takes in contains fewer molecules, so the pressure drops steeply at first and then ever more gradually. A rough guide is that removing most of the air from a vessel takes several times longer than its volume divided by the flow rate: a 5 litre bell jar is far from empty after half a minute, even though 5 litres have passed through the pump.

How low the pressure finally goes is a separate property, the ultimate vacuum, which depends on the pump design and on leaks in the system. School demonstrations and filtration need only a moderate vacuum, so the flow rate mainly decides how long students wait.

Laboratory Uses

  • Evacuating bell jars for air-pressure and sound demonstrations
  • Vacuum filtration with a Buchner funnel and filter flask
  • Degassing small volumes of liquid before experiments
  • Replacing a water aspirator where water use is a concern

Using the Pump Safely and Well

For filtration, connect the vacuum pump 10 L/min to the side arm of a filter flask through a trap bottle so that liquid cannot be drawn into the pump. For bell jar work, use thick-walled vacuum tubing that will not collapse, and fit a valve so the jar can be isolated before the pump is switched off. Corrosive or solvent vapours should not be pumped unless the pump is designed for them.

Specifications

Item Electric laboratory vacuum pump
Flow rate 10 L/min, as stated in the product name
Uses Bell jar evacuation, vacuum filtration, degassing small samples
Connection Vacuum tubing to a valve, trap or filter flask
Pump type, ultimate vacuum and supply rating Confirm at enquiry

Care & Handling

  • Always fit a trap between a filtration flask and the pump
  • Run the pump on a stable, ventilated surface, leaving space for cooling air
  • Do not pump corrosive or solvent-laden vapours unless the pump is rated for them
  • Switch off and unplug before cleaning or changing tubing

Why Choose LabEquip

Technicians choose an electric pump of this size when bell jar demonstrations and filtrations happen several times a day and hand pumping slows lessons down. It suits the two-valve vacuum plate with electrical feedthrough; for an oil-free pump that can also supply compressed air, compare the portable diaphragm vacuum pump cum air compressor. More physics lab equipment is in the category, and LabEquip can confirm the supply rating.

Frequently Asked Questions

How long does the pump take to evacuate a bell jar?

It depends on the jar volume, any leaks and the vacuum required. Because the pressure falls roughly exponentially, reaching a good demonstration vacuum takes several times longer than the jar volume divided by 10 litres per minute.

Can the pump be used for vacuum filtration?

Yes. Connect it to the side arm of a filter flask through a trap bottle, so that filtrate or foam cannot reach the pump, and release the vacuum before switching off.

Why does the pressure fall more slowly towards the end?

The pump sweeps roughly the same volume each minute, but at lower pressure that volume contains less gas. The amount of air removed per minute therefore drops as the pressure falls.

Does the pump need oil?

That depends on the pump type. Diaphragm pumps run without oil, while rotary vane pumps need oil changes and an outlet mist filter; confirm the type of this model when you enquire.

Is it safe to use with chemicals?

Use a cold trap or a suitable filter when vapours are present, and avoid pumping corrosive or flammable vapours unless the pump is designed for them. Vapours can condense inside the pump, damaging seals and creating a hazard.

What tubing should be used?

Thick-walled rubber or plastic vacuum tubing that does not collapse under suction. Thin tubing flattens when the pressure inside falls and blocks the flow.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)