Search

In Stock

Balances, Chemical

Agate Knife-Edge Pivots: Engineered with precision-ground agate stone bearings and a high-tensile metallic beam to minimize mechanical friction, delivering a repeatable sensitivity of 1mg for delicate analytical tasks.

Three-Door Glass Draft Shield: Features an integrated vertical alignment system and an adjustable leveling base to neutralize ambient air currents and mechanical vibrations, ensuring absolute measurement integrity during sensitive weighing cycles.

$14.95

Quick Answer: A chemical balance is an equal-arm beam balance with two pans, used in school and college chemistry laboratories to weigh reagents, crucibles and reaction products against a set of standard masses. Because the instrument compares one mass with another, its result does not depend on local gravity.

How a Chemical Balance Works

The beam pivots on a central knife-edge, normally of agate or hardened steel, resting on a flat bearing plate. A pan hangs from a knife-edge near each end of the beam at equal distances from the centre, and a long pointer fixed to the beam swings in front of a small graduated scale at the foot of the pillar. When the loads on the two pans are equal, their moments about the central edge cancel and the pointer settles at the middle of its scale.

A knob at the front works the arrestment, which lifts the beam off its knife-edges when the balance is idle or while masses are being changed. Levelling screws on the base, checked against a plumb line or spirit level, set the pillar upright. Balances of this type are traditionally kept in a glazed case so that draughts and corrosive fumes do not reach the beam.

Weighing Chemicals Correctly

Reagents never go directly onto the pan. Solids are weighed in a watch glass, weighing bottle or creased paper whose own mass is found first, and substances that absorb water from the air, such as anhydrous calcium chloride, are weighed in a stoppered bottle. When a sample has to be transferred, chemists weigh by difference: the bottle and substance are weighed, the required portion is tipped into the flask, and the bottle is weighed again, so the loss in mass is exactly what was delivered.

Masses are added from the largest downward, using forceps rather than fingers, with the beam arrested at each change. Fractions below the smallest loose mass are handled with a rider, a small wire mass moved along a graduated beam, on balances that have one. A crucible taken from a flame must cool in a desiccator before weighing, because the warm air rising around it pushes up on the pan and makes it seem lighter.

Specifications

Type Equal-arm beam balance with two pans
Pivots Central and end knife-edges on bearing planes
Indicator Pointer swinging over a scale at the pillar foot
Used with A box of standard masses and forceps
Capacity, sensitivity, case and rider arrangement Confirm at enquiry

Uses in the Chemistry Laboratory

  • Weighing solute for standard solutions in titration practicals
  • Finding the water of crystallisation in a hydrated salt by heating to constant mass
  • Showing conservation of mass in a reaction carried out in a closed flask
  • Weighing samples for percentage composition and empirical formula exercises

Care & Handling

  • Arrest the beam before loading or unloading either pan and before moving the balance.
  • Keep spilled chemicals off the pans and base; brush or wipe them away at once with a dry cloth.
  • Return the masses to their box after use and lift them only with forceps.
  • Keep a drying agent such as silica gel in the case, and site the balance away from acid fumes.

Why Choose LabEquip

Chemistry departments in schools and junior colleges usually order chemical balances together with matching boxes of masses, one set per bench group. LabEquip lists it in its physics lab equipment range next to the double-pan physical balance; send your class size and the masses you need through our contact page.

Frequently Asked Questions

What is the difference between a chemical balance and a physical balance?

Both are equal-arm two-pan beam balances working on the same principle. In laboratory usage the chemical balance is the one kept for weighing reagents, often with a rider for small fractions and a case that shields it from fumes, while the physical balance is used for solid objects in physics practicals. The names overlap, so compare sensitivity and fittings rather than the label.

Why should chemicals never be placed directly on the pan?

Many reagents corrode metal pans or leave residues that change the pan’s mass, which spoils every later reading. A container of known mass keeps the pan clean and lets the substance be transferred without loss.

What does weighing by difference mean?

It means finding the mass delivered from the loss in mass of a container. Weigh the bottle with the sample, transfer the portion you need, then weigh the bottle again. Material left clinging to the bottle is not counted, so the result is the mass actually transferred.

Why must the beam be arrested while masses are changed?

Dropping a mass onto a free pan jolts the beam and can chip or blunt the knife-edges, which lowers the sensitivity permanently. Arresting lifts the edges clear so they take no shock.

Does the balance need adjusting for a different location?

No. A beam balance compares two loads in the same gravitational field, so the effect of gravity cancels. It only needs to be levelled and its zero checked before use.

Why does a hot crucible appear lighter than a cold one?

Air heated by the crucible rises and pushes up on the pan, and the warm air around it also changes the buoyancy. Cool the crucible to room temperature in a desiccator before weighing it.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)