Quick Answer: A counter balance is a mechanical two-pan weighing scale with both pans above the beam, designed to stand on a shop counter or bench, where goods on one pan are balanced against standard weights on the other. It needs no electricity and is also used in schools to show how linked pans stay level.
Pans Above the Beam
In an ordinary beam balance the pans hang below the beam. This design supports its pans from below instead, so goods can be heaped onto an open pan or scoop without chains or cords in the way. To keep the pans level as the beam tips, the mechanism usually uses a parallelogram linkage of the kind Gilles Personne de Roberval presented in 1669, or a related arrangement, beneath the pans.
The linkage gives the balance a surprising property: within limits, the result does not depend on where the load sits on the pan. A load near the edge balances the same weights as one in the centre, because the parallel links hold the pan upright and only the vertical force reaches the beam. Demonstrating this Roberval paradox is a memorable way into moments and forces.
Weighing with a Counter Balance
Set the balance on a firm, level counter and check that the empty pans balance, with the pointer or the two indicator tips aligned. Place the goods on one pan and add weights to the other, largest first, until the pans come level. For sale by weight, both the scale and its weights are normally subject to legal metrology verification and stamping, so shops should arrange this locally before trading with it.
Applications
- Weighing loose grains, sweets, vegetables or hardware on a shop counter
- Weighing materials in home science and food classrooms
- Showing why linked pans stay level and why the load position does not matter
- Comparing masses in primary maths and science
Specifications
| Type | Mechanical two-pan counter scale |
| Pan position | Above the beam mechanism |
| Weighing method | Comparison with standard weights |
| Power | None |
| Capacity, pan or scoop type and weights | Confirm at enquiry |
Care & Handling
- Use the balance on a level counter and re-check the empty balance after moving it.
- Keep the linkage under the pans free of dust and spilled grain.
- Lift loads on and off rather than sliding them, to avoid jolting the mechanism.
- Store the weights dry so they do not rust and change mass.
Why Choose LabEquip
Shops, canteens, home science rooms and primary schools buy counter balances for durable weighing without power. LabEquip lists it with its physics and weighing equipment; the hanging double pan balance is a suspended alternative, and enquiries go through the LabEquip enquiry page.
Frequently Asked Questions
Why do the pans stay level as the beam tips?
The pans are carried on a linkage, usually a parallelogram, that keeps them upright as the beam turns. Without it, pans supported from below would tilt and spill the load.
What is the Roberval paradox?
It is the observation that a Roberval-type balance gives the same result wherever the load is placed on the pan. The parallel links pass only the vertical force to the beam, so the load’s position does not upset the balance.
Can a counter balance be used for selling goods?
Yes, it is a traditional shop scale, but weighing for trade usually requires the scale and weights to be verified and stamped by the local legal metrology authority. Arrange this before using it commercially.
What weights are used on a shop counter scale?
Commercial weights, usually cast iron or brass, in a set that covers the loads to be weighed. Keep them clean and dry, because rust or dirt changes their mass.
How do I check the balance before use?
With both pans empty, see that the indicator shows level. Then place equal known weights on both pans; the balance should stay level. If it does not, have the mechanism adjusted.
How is a counter balance different from a hanging balance?
The counter type sits on a bench with its pans above the mechanism, which suits heaped or loose goods. A hanging balance is suspended from a hook with its pans on cords, which makes it portable but less convenient for loose materials.
Last Updated: October 2026










Reviews
There are no reviews yet.