Search

In Stock

Balance, Double Pan General Purpose, Hanging Type

Suspension-Optimized Equal Arm Beam: Features a precision-calibrated metallic beam with central and end-pivots designed to minimize frictional torque, ensuring high-sensitivity comparative weighing across the full capacity range.

Detachable Specialized Pan System: Equipped with two deep-form pans suspended by high-tensile chains, engineered specifically to accommodate bulk volumetric samples and facilitate specialized hydrostatic weighing procedures.

₹980.00

Quick Answer: A hanging double pan balance is a simple equal-arm balance in which two pans hang by cords or chains from the ends of a beam that is itself suspended from a hook, ring or stand. This general purpose balance is used for comparing masses and weighing with loose weights in primary classrooms, stores and field work.

Design of the Hanging Balance

A loop or handle at the middle of the beam acts as the pivot, and a pointer above or below it shows when the beam is level. Each end of the beam carries a pan on cords or chains, so the pan hangs freely and stays horizontal. The balance can be hung from a stand, a ceiling hook or a clamp and needs no bench of its own.

Unlike a physical balance on a pillar, the hanging type has no glass case, no beam arrest and no fine pointer scale. It is built for robustness and visibility rather than sensitivity, so a whole class can watch the beam tip and come level as masses are added.

Classroom and Practical Uses

  • Comparing heavier and lighter objects in early-years and primary science
  • Introducing equal-arm balancing and the idea of standard weights in maths lessons
  • Weighing produce, grain or materials with a set of loose weights
  • Outdoor and field activities where no bench is available

Getting a Fair Reading

Hang the balance from a fixed support where it can swing freely without touching anything. With both pans empty, check that the pointer stands at its centre; a small difference can be corrected with the adjusting nut if one is fitted, or with a pinch of modelling clay on the lighter side. Put the object in one pan and add weights to the other until the beam is level, then total the weights. Swapping object and weights between the pans and weighing again shows whether the arms are truly equal.

Specifications

Type Equal-arm double pan balance, suspended
Pans Two, hung from the beam ends
Mounting Hung from a hook, ring or stand
Reading Pointer at the beam centre shows level
Power None
Capacity, pan material and weights supplied Confirm at enquiry

Care & Handling

  • Hang the balance only from a support that can safely carry it with both pans loaded.
  • Keep the cords or chains untangled so both pans hang at the same height.
  • Wipe the pans clean after weighing food, soil or powders.
  • Store the balance hanging or lying flat so the beam does not bend.

Why Choose LabEquip

Primary schools, community learning centres and small stores buy this balance for its simplicity and portability. For practical physics with finer readings, LabEquip also offers a double pan physical balance in its physics category; send your requirement through the contact page.

Frequently Asked Questions

How is a hanging balance different from a physical balance?

A physical balance stands on a pillar with knife-edges, a beam arrest and a pointer scale for sensitive work. The hanging balance is a simpler suspended beam for comparing masses where high sensitivity is not needed.

Where should a hanging balance be hung?

From a firm hook, stand or bar where the pans swing freely and do not touch walls or the bench. The support must hold the balance plus the full load in both pans.

What weights should be used with it?

Any set of standard loose weights that covers the masses you want to measure. For young learners, non-standard units such as cubes or counters can introduce the idea of measuring first.

How can I tell whether the arms are equal?

Balance an object against weights, then swap the object and the weights to the opposite pans. If the beam is still level the arms are equal; if not, the difference shows the arm error.

Why must the pans hang at the same height?

Twisted or unequal cords can let a pan touch the bench or pull the beam off level, giving a false reading. Equal, untangled cords keep both pans free.

Is it suitable for young children to use?

Yes, with supervision. It has no glass or electrical parts, and the visible tipping of the beam makes it a good first introduction to weighing. Keep heavy weights low and make sure the support is secure.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)