Search

In Stock

Ultra Flex Support Kit

$21.04

Quick Answer: The Ultra Flex Support Kit is a laboratory support set built around a flexible metal gooseneck arm, pictured with screw clamps that have coloured jaws, a short rod and rubber pads, used to hold a probe, sensor or small vessel at whatever angle a set-up needs.

Where a Flexible Arm Beats a Rigid Rod

A retort stand with boss heads holds things firmly, but only along straight lines and at right angles. The ultra flex support kit swaps the rigid rod for a flexible gooseneck that bends and stays put, so a temperature probe can be angled into a narrow flask neck or a sensor can reach over the edge of a bath without a tower of clamps.

In the listing photo the kit includes a bright metal flexible arm with a clamp at its end, a second clamp with a screw fixing, a short rigid rod and a few dark rubber pads, which are usually used to line clamp jaws or cushion glass. The exact parts and the arm’s length are not given in the title.

Flexible arms trade some stiffness for reach. They suit light loads such as probes, thermometers, small tubes and light sensors; a filled flask or a condenser belongs in a rigid clamp on a stand.

Applications

  • Positioning a temperature probe in a flask on a hotplate stirrer
  • Holding a pH or conductivity electrode at an angle in a beaker
  • Pointing a small light or sensor at a sample during a demonstration
  • Supporting light tubing or a thermometer over a water bath

Specifications

Type Flexible-arm support kit
Main part Metal gooseneck arm, as pictured
Clamps Screw clamps with coloured jaws, as pictured
Other parts shown Short rod and rubber pads
Arm length and full contents Confirm at enquiry

Care & Handling

  • Bend the flexible arm gradually; sharp, repeated kinks at one point weaken a gooseneck over time.
  • Keep loads light and close to the clamp, since a heavy item can make the arm droop slowly.
  • Wipe off chemical splashes promptly and keep the arm away from open flames.
  • Store clamps with their jaws lightly closed so the pads keep their shape.

Why Choose LabEquip

Teaching and research labs add a flexible support when probes and sensors need awkward angles that rigid stands cannot give. LabEquip also lists the rigid Support Rod and Clamp Kit in General Lab Products; ask about kit contents through the contact page.

Frequently Asked Questions

What can the flexible arm hold?

Light items such as temperature probes, thermometers, small tubes, electrodes and sensors. Heavy glassware should be held in a rigid clamp on a stand.

How is the kit attached to a stand?

The photo shows a clamp at the base of the arm and a short rod, so the kit can be clamped to a stand rod or bench fixture. Check the clamp opening against the rod diameter you use.

Will the arm hold its position?

A gooseneck stays where it is bent under light loads. If it starts to droop, move the load closer to the base or use a shorter reach.

What are the rubber pads for?

Pads like those shown are usually fitted to clamp jaws to grip glass or probes without scratching them and to stop them slipping.

Can the arm be used near a hotplate?

Yes, as long as the arm and clamps stay out of direct heat and away from flames. Metal parts near a hot surface warm up, so handle them with care.

How does this differ from a support rod and clamp kit?

A rod-and-clamp kit holds items rigidly in straight lines from a stand. The flexible arm reaches around obstacles and sets odd angles, but carries lighter loads.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)