Search

In Stock

Test tube rack for water bath with stainless steel tank

$14.89

Quick Answer: The Test tube rack for water bath with stainless steel tank is a three-level wire test tube rack for water baths, pictured with a fine-mesh floor, a square-grid middle tier and a top frame whose long rails end in bent-down hooks, made to hold tubes upright in the bath.

Three Levels of Wire

Each level of this rack does a different job. The fine mesh at the bottom forms a floor for the tube ends, so even narrow tubes cannot slip through. The square grid in the middle keeps each tube upright in its own cell. The top frame adds a third guide near the tube rims, and its long rails run past the ends of the rack and bend down into hooks.

Those hooked ends let the rack hang across the tank from its rim or act as handles for lifting it in and out; which of the two applies depends on how the rack’s length compares with the bath. Wire leaves the water free to flow between tubes, so every tube sees the same temperature and the rack warms up and drains quickly.

The title ties the rack to water baths with a stainless steel tank; its length and hook spacing decide the fit, so compare them with the tank before ordering. For a rigid plate design with fixed positions, see the stainless steel rack for 16 tubes; to hang a rack at a set depth in a bain-marie, the support stand for stainless steel bain-marie is the matching frame.

Specifications

Type Wire test tube rack for water baths
Levels Mesh floor, square-grid middle tier and top frame, as pictured
Ends Top rails extended into bent-down hooks
For use in Water baths with a stainless steel tank, as titled
Tube positions and tube diameter Confirm at enquiry

Water Bath Jobs for This Rack

  • Incubating tubes of enzyme or digestion reactions at a steady temperature
  • Heating food-test tubes, such as Benedict’s tests, in a hot water bath
  • Warming a set of sample tubes so they all start a test at the same temperature
  • Standing tubes upright in a sink or tray while they drain after washing

Care & Handling

  • Fill tubes before the rack goes into the water; empty tubes float and can rise out of the grid.
  • Keep the bath water below the tube rims so no water enters open tubes.
  • Rinse the rack after use and dry it, paying attention to the mesh floor where deposits collect.
  • Straighten or replace a rack whose hooks have bent, since a hanging rack must sit level.

Why Choose LabEquip

School and college labs that already own a stainless steel water bath buy this rack to run a whole class’s tubes at once. LabEquip lists it in General Lab Products; send the inside size of your tank through the contact page.

Frequently Asked Questions

What is the mesh floor for?

It stops the ends of narrow tubes slipping through the rack and spreads their weight. Water still passes through it, so tubes are heated from below as well as from the sides.

Do the hooks hang the rack on the tank rim?

They can, when the rack’s length matches the tank opening, which keeps it at a set height above the floor. In a longer tank the hooked ends simply serve as handles for lifting.

Why use a wire rack in a water bath?

Wire leaves plenty of open space, so water flows freely between tubes and every tube reaches the same temperature. A wire rack also drains and dries quickly after use.

Can the rack go in a boiling water bath?

A metal wire rack is not harmed by boiling water. Check that the tubes suit the temperature, and lift the rack out with heat-resistant gloves.

How do I stop tubes floating out of the rack?

Put liquid in the tubes before placing the rack in the water, and keep the water level below the tube rims. Glass tubes float less readily than plastic ones.

Can it be used outside the bath?

Yes. It works as an ordinary bench rack or draining rack, and the hooked ends make it easy to carry between bench and sink.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)