Search

In Stock

Stainless steel rack for water bath WTB

$12.40

Quick Answer: The Stainless steel rack for water bath WTB is a stainless steel test tube rack made to fit WTB-series water baths, pictured as box-type plate racks with a row of tube holes along the top and wire handles at each end.

Racks Sized to the WTB Tank

WTB is a Memmert water bath series offered in several tank sizes. Accessories for it are made to the internal dimensions of those tanks, so a rack sits square without sliding about, and several racks can stand side by side to use the floor space well.

The photo shows three plate racks, each a folded stainless steel box with holes in the top plate and a wire handle at both ends, loaded with test tubes. Plate racks locate tubes more firmly than wire, and the handles let a rack come out of hot water without anyone reaching into the tank. The different tube heights pictured suggest that racks are made for more than one tube size.

Two details decide the right rack: the WTB model, which sets the tank size, and the diameter of the tubes. For racks that move with a shaking system, the rack for the WTB shaking system is a separate item, and a WTB raising grid lifts vessels off the tank floor.

Specifications

Material Stainless steel, as titled
Made for WTB-series water baths, as titled
Form Box-type plate racks with end handles, as pictured
Tube holding Row of holes in the top plate, as pictured
Handling Wire handle at each end
WTB model and tube diameter Confirm at enquiry

Using the Racks in a WTB Bath

  • Keeping sample tubes at a set temperature during enzyme assays and digestions
  • Thawing and warming reagents in tubes before use
  • Incubating tube-based tests at 37 °C in teaching and research labs
  • Placing several racks side by side to fill a larger WTB tank

Care & Handling

  • Choose tubes that match the hole size; loose tubes lean and touch their neighbours.
  • Lift racks by their handles, with gloves if the water is hot.
  • Rinse and dry after use, and descale occasionally if hard water leaves deposits.

Why Choose LabEquip

Laboratories that already run a WTB water bath buy these racks to add positions or replace worn ones. LabEquip lists them in General Lab Products; send your WTB model and tube size through the contact page.

Frequently Asked Questions

What is a WTB water bath?

WTB is a Memmert series of laboratory water baths offered in several tank sizes. Racks labelled for WTB are made to fit inside those tanks.

Why use a rack made for the bath instead of any tube rack?

A matched rack sits square in the tank without sliding, and several can stand side by side with little wasted space. A random rack may tip, float or stop the lid closing.

Can the racks go in boiling water?

Stainless steel is unaffected by boiling water. Check the bath’s own maximum setting and the heat rating of the tubes.

Are there different racks for different tube sizes?

Yes. The hole diameter sets the tube size. The photo shows racks holding tubes of different heights, so pick the one that matches your tubes.

How should the racks be cleaned?

Rinse with water after each use and wash with a mild detergent when needed. Descale with dilute citric acid if hard water leaves white deposits, then rinse and dry.

Do these racks work with the shaking system?

They are static racks for the tank floor. Racks used with a shaking system fix onto its moving frame and are a separate item.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)