Quick Answer: The Sika Type Industrial Thermometer is a machine thermometer in which a glass measuring tube sits inside a protective metal case, with a metal stem that goes into a pipe, tank or thermowell. A Sika type industrial thermometer is read on site on boilers, pipelines, heat exchangers and engines, with no power supply needed.
Glass Measurement in a Metal Case
A bare glass thermometer would not last long on a pump or boiler. Industrial thermometers of this pattern keep the familiar liquid-in-glass principle but mount the tube in a metal housing, typically with a V-shaped profile and a clear front, and extend the bulb into a metal stem. The stem is screwed into the process, directly or through a thermowell, and conducts heat to the bulb inside it.
A thermowell is a closed metal tube fixed into the pipe or vessel. With one fitted, the thermometer can be removed for replacement without draining the line, and the stem is protected from pressure and flow. The trade-off is a slower response, which a small amount of suitable heat-transfer fluid in the well can reduce.
In colleges this pattern appears on heat-exchanger rigs, boiler models and refrigeration trainers, where students read inlet and outlet temperatures directly from the rig. The stem length, thread, case form and range must suit the fitting point, which is why they are settled per order. Compared with a general industrial thermometer, the Sika type is chosen when a glass scale read through a rugged case is wanted.
Specifications
| Type | Industrial (machine) glass thermometer, Sika pattern |
| Construction | Glass measuring tube in a protective metal case with a metal stem |
| Installation | Screwed into a process connection, directly or via a thermowell |
| Reading | Direct visual reading on site; no power needed |
| Typical fitting points | Pipelines, boilers, tanks, heat exchangers, engines |
| Stem length, thread, case form and range | Confirm at enquiry |
Applications
- Inlet and outlet temperature points on heat-exchanger and refrigeration trainers in engineering labs
- Boiler feed-water, hot-water and condensate lines in institutional plant rooms
- Engine cooling-water and lubricating-oil temperatures on test beds
- Storage tanks where a local reading is needed without electrical instruments
Care & Handling
- Tighten the stem with a spanner on its hexagon, never by twisting the case.
- Mount the case facing the operator, where it is protected from knocks and from steam leaks.
- If the column shows gaps after transport, reunite it before installation.
- Fit a thermowell where the line is pressurised or the fluid corrosive, so the thermometer can be serviced safely.
Why Choose LabEquip
Engineering colleges, polytechnics and plant-maintenance departments buy Sika type thermometers for rigs and service lines where simple, power-free readings are required. LabEquip lists them in General Lab Products; send the stem length, thread size and temperature range on the contact page.
Frequently Asked Questions
What does Sika type mean?
It describes a widely used pattern of industrial glass thermometer, with the glass tube protected in a metal case and a stem that screws into the process. It names the design pattern of the instrument rather than a laboratory thermometer.
Do I need a thermowell?
Use one where the pipe is under pressure, the flow is fast or the liquid is corrosive, or where the thermometer must be removed without draining the system. For open, low-pressure tanks a direct stem may be enough.
Why is the reading slow to change?
Heat has to pass through the stem, any thermowell and the gap around the bulb. Filling the well with a suitable heat-transfer fluid and choosing a close-fitting stem both speed up the response.
Can the case be angled?
Industrial thermometers of this kind are made in straight and angled forms so that the scale faces the operator whichever way the pipe runs. State the orientation you need when ordering.
How long should the stem be?
Long enough that the sensing part sits in the flowing liquid rather than in a dead pocket near the wall. In small pipes that usually means reaching towards the centre of the bore.
Is it suitable for steam lines?
Only if its range covers the steam temperature and it is fitted in a pressure-rated thermowell. Verify both the range and the well’s pressure rating before installing it on any steam or pressurised line.
Last Updated: September 2026










Reviews
There are no reviews yet.