Search

In Stock

Shelf for climate chambers

$14.10

Quick Answer: The shelf for climate chambers is a wire grid shelf, pictured in several sizes with support rails, that adds a loading level inside a climate, humidity or test chamber. Its open grid lets conditioned air reach samples from below as well as above.

Why Climate Chambers Use Grid Shelves

A climate chamber only gives reliable results if every sample sees the same temperature and humidity. Solid shelves would split the cabinet into stagnant layers, with the space under each one lagging behind the set point. A grid carries the load while leaving most of its area open, so the chamber fan can circulate air through the whole load.

Extra levels also make better use of the volume. A stability study may involve many containers held for months, and spreading them over several levels avoids stacking, which would shield the lower containers. Spacing levels evenly from top to bottom, and keeping samples away from the walls, gives the most even conditions.

The photograph shows grids of different sizes together with the rails or brackets they rest on. Shelves are model-specific, so give LabEquip the make, model and internal dimensions of your chamber when ordering, so the right size and supports are supplied.

Specifications

Product Shelf for climate, humidity and test chambers
Form as pictured Wire grid shelves with support rails or brackets
Purpose Additional loading level with open airflow
Fits Chambers with matching internal supports, such as the SP climate chamber
Size, load limit and fitting for your chamber Confirm at enquiry

Applications

  • Extra levels for stability-study containers in pharmaceutical climate chambers
  • Spreading paper, packaging or textile test pieces during conditioning
  • Holding trays of seed or soil samples in humidity studies
  • Replacing a damaged or missing shelf in an existing chamber

Loading & Cleaning

  • Distribute weight across the grid and stay within the load limit stated for your chamber
  • Put trays under liquids or powders that could drip or spill onto lower levels
  • Wash with a mild detergent, rinse and dry fully before refitting, so no residue enters the chamber
  • Check that each grid sits fully on its supports before loading

Why Choose LabEquip

Labs running long stability programmes often need more shelves than came with the chamber, or a replacement after years of use. LabEquip supplies these grids through its general lab products range, alongside the HCP humidity control system; send your chamber details through the contact page.

Frequently Asked Questions

Why not use a solid shelf to hold more small items?

A solid shelf blocks the airflow, so the space beneath it heats, cools and humidifies more slowly than the rest of the chamber. Use a grid, and put small items in a perforated tray if they could fall through.

How many shelves can a climate chamber take?

That depends on the chamber’s internal height and its number of support positions. Leave enough space between levels for air to flow over the tallest containers rather than filling every position.

Will the shelf fit my existing climate chamber?

Shelves are made to suit particular internal widths and support systems. Send the make, model and internal dimensions of your chamber so LabEquip can match the grid and its supports.

Can wire shelves corrode in a humid chamber?

Long exposure to high humidity can corrode unsuitable metals or damaged coatings. Wipe the grids dry after high-humidity runs and replace any that show rust, since rust particles can contaminate samples.

Should samples touch the chamber walls?

No. Keep a gap between samples and the walls and back of the chamber. Walls can be slightly warmer or cooler than the air, and samples pressed against them do not experience the set conditions.

How do I clean the shelves?

Remove them, wash with a mild detergent solution, rinse with clean water and dry completely. Avoid chlorine-based cleaners on metal grids, as residues can promote corrosion in a humid chamber.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)