SP Climate Chamber

The StemAids SP Climate Chamber is a professional climatic test chamber designed to regulate temperature and relative humidity for controlled environmental testing. It is suitable for stability testing, accelerated ageing, drying studies, packaging tests, material conditioning, pharmaceutical research, food testing, electronics testing, seed studies, quality control, and educational laboratory demonstrations.

Product Description

The StemAids SP Climate Chamber provides controlled temperature and humidity conditions for laboratories that need repeatable environmental simulation. It can generate cold, heat, humidity, and dry-air conditions, making it suitable for a wide range of temperature and humidity tests.

The SP range is available in 90 L, 260 L, and 540 L configurations to meet different laboratory capacity requirements. Its two independent regulators allow simple operation, while the display shows both set values and actual values for temperature and relative humidity. This makes the chamber practical for routine testing, stability studies, product conditioning, and research workflows.

Product Specifications

Key Features

• Controlled temperature range from 10°C to 60°C
• Relative humidity control from 10% RH to 95% RH
• Available in 90 L, 260 L, and 540 L chamber capacities
• Suitable for drying, accelerated ageing, stability testing, and material conditioning
• Two independent regulators for simple temperature and humidity control
• Simultaneous display of setpoint and actual temperature / humidity values
• Air dryer support helps extend operating range
• Optional shelves, key lock, timer, visibility window, water supply, and cable port
• Useful for research, quality control, teaching, and industrial laboratory workflows

How to Use

1. Place the StemAids SP Climate Chamber on a clean, level, dry, and well-ventilated laboratory floor.
2. Connect the chamber to the correct electrical supply as mentioned on the rating plate.
3. Fill or connect the deionized water supply system if humidity testing is required.
4. Switch on the chamber and allow the controller display to initialise.
5. Set the required temperature between 10°C and 60°C.
6. Set the required relative humidity between 10% RH and 95% RH.
7. Allow the chamber to reach stable conditions before placing test samples inside.
8. Arrange samples on shelves without blocking air circulation.
9. Close the door properly and start the test cycle according to the laboratory method.
10. Monitor the actual temperature and humidity values during testing.
11. Record test conditions, sample details, start time, end time, and observations.
12. After completion, remove samples safely and clean the chamber if required.

Applications

• Pharmaceutical stability testing
• Accelerated ageing studies
• Food shelf-life evaluation
• Packaging material conditioning
• Electronics humidity and temperature testing
• Polymer and material behaviour studies
• Seed, plant, and agriculture sample conditioning
• Drying and humidity exposure tests
• Quality-control environmental testing
• School, college, and research laboratory demonstrations

Safety and Handling Guidelines

• Use the chamber only within the specified temperature and humidity range.
• Do not store flammable, explosive, corrosive, or unsafe materials unless the chamber is specifically rated for that use.
• Keep air circulation vents and shelves unobstructed.
• Use deionized or recommended water for humidity generation to reduce scaling.
• Do not overload shelves beyond their rated capacity.
• Wear gloves when handling hot, wet, or chemically treated samples.
• Do not open electrical panels unless handled by qualified service personnel.
• Clean spills immediately using a suitable laboratory-safe method.
• Maintain calibration, temperature mapping, and humidity verification records where required.
• Disconnect power before deep cleaning or maintenance.

Quality and E-E-A-T Notes

The StemAids SP Climate Chamber supports evidence-based testing by providing controlled temperature, controlled relative humidity, repeatable sample conditioning, and visible setpoint monitoring. For regulated testing, users should follow written SOPs, maintain calibration certificates, document temperature and humidity records, and use validated test methods wherever required.

FAQ

1. What is the StemAids SP Climate Chamber used for?

It is used for controlled temperature and humidity testing, stability testing, accelerated ageing, drying, material conditioning, and environmental simulation.

2. What is the temperature range?

The temperature range is 10°C to 60°C.

3. What is the humidity range?

The relative humidity range is 10% RH to 95% RH.

4. What chamber volumes are available?

The SP range is available in 90 L, 260 L, and 540 L configurations.

5. Can it be used for pharmaceutical stability testing?

Yes, it is suitable for pharmaceutical stability and conditioning studies when used with appropriate SOPs, calibration, documentation, and validation procedures.

6. Can it be used for food shelf-life testing?

Yes, the chamber can be used for food packaging, storage-condition simulation, and shelf-life support studies within the specified temperature and humidity range.

7. Does it display both setpoint and actual values?

Yes, the display shows temperature and relative humidity setpoints as well as actual measured values.

8. Does it require deionized water?

Deionized water is recommended for humidity operation to reduce mineral deposits and maintain stable chamber performance.

9. Can cables or sensors be passed into the chamber?

Yes, a 50 mm cable entry port with airtightness plug is available as an option.

10. Is a visibility window available?

Yes, a visibility window is available as an optional accessory for selected configurations.

11. How should the chamber be maintained?

Keep the chamber clean, use recommended water quality, avoid overloading shelves, inspect seals, verify temperature and humidity performance, and follow preventive maintenance schedules.

12. Is it suitable for educational laboratories?

Yes, it is suitable for school, college, university, research, and industrial training laboratories for humidity, temperature, and environmental testing demonstrations.

Why Choose StemAids?

StemAids laboratory environmental chambers are selected for practical workflows, controlled testing, and institutional laboratory use. The StemAids SP Climate Chamber supports temperature-humidity testing, stability studies, drying tests, ageing acceleration, material conditioning, and quality-control documentation for pharmaceutical, food, packaging, electronics, agriculture, research, and educational laboratories.

SEO Keywords

StemAids SP Climate Chamber, SP Climatic Chamber, Laboratory Climate Chamber, Temperature Humidity Chamber, Stability Testing Chamber, Humidity Test Chamber, Environmental Test Chamber, Climate Chamber for Laboratory, Pharmaceutical Stability Chamber, Food Shelf Life Testing Chamber, Material Ageing Chamber, StemAids Laboratory Equipment