Quick Answer: A Phillips screwdriver has a cross-shaped, pointed tip that fits the matching cross recess of Phillips screws, fitted here in a plastic handle. The Phillips screwdriver is the everyday driver for cross-head screws on apparatus, kits, fittings and furniture.
Cross Recess and Point Size
Phillips tips are sized by number, from very small points for electronics up to large ones for construction screws, and the middle sizes cover most general screws. The right size fills the recess so that all four wings of the tip bear on the screw; a tip one size too small slips in easily but rides out under load. The tip size of this screwdriver is not in its title and can be confirmed with LabEquip.
The Phillips recess has tapered sides, so under high torque the tip tends to climb out, an effect known as cam-out. Firm pressure along the screw axis keeps it engaged. Pozidriv screws look similar but have fine extra ribs between the arms; a Phillips point fits them loosely and slips, so check the screw head before choosing the driver.
Cross-head screws hold battery covers, instrument cases, kit frames and cabinet fittings throughout a lab. The plastic handle is a grip, not live-work insulation, so equipment is switched off first. For slotted screws the flat type screwdriver is the matching tool, and a reversible screwdriver combines both tips in one handle.
Specifications
| Tip | Phillips cross-head, pointed |
| Handle | Plastic |
| Fits | Phillips cross-recess screws |
| Not a match for | Pozidriv screws, which need a Pozi tip |
| Tip size and blade length | Confirm at enquiry |
Care & Handling
- Press firmly into the screw and keep the driver in line with it while turning.
- Check whether a screw is Phillips or Pozi before choosing the driver.
- Replace a driver whose tip wings are rounded or chipped.
- Keep the handle dry and clean for a secure grip.
Applications
- Opening and closing cases on meters, power supplies and sensors when switched off
- Assembling STEM, robotics and electronics kits with cross-head screws
- Fitting handles, hinges and brackets on lab furniture
- General maintenance of apparatus stands and enclosures
Why Choose LabEquip
Almost every lab, workshop and classroom toolkit needs a cross-head driver, and technicians often keep two or three sizes. LabEquip stocks this Phillips screwdriver in its General Lab Products range; tip sizes can be requested on the contact page.
Frequently Asked Questions
How do I tell a Phillips screw from a Pozi screw?
Look closely at the recess. Pozi screws have four extra fine lines marked between the arms of the cross, while Phillips screws have a plain cross. The matching driver tips differ in the same way.
Which Phillips size do I need?
Try the tip in the screw. The correct size seats deeply with no wobble and all four wings touching. Small sizes suit electronics and kits, middle sizes most general screws.
Why does the screwdriver jump out of the screw?
Cross-head recesses have sloping walls, so the tip climbs out if pressure is too low, the size is wrong or the driver is tilted. Push firmly in line with the screw while turning.
Can it be used on live electrical equipment?
Not unless it is specifically marked and rated as an insulated tool for live work. Switch off and unplug equipment before opening it.
Can I turn a screw whose recess is damaged?
If the recess is only slightly worn, a new tip of the correct size pressed firmly may still turn it. Badly stripped recesses need a screw extractor, or a slot cut with a hacksaw for a flat blade.
How do I avoid stripping screws in soft materials such as plastic?
Stop turning as soon as the screw head seats, since plastic threads strip easily. Hand tightening gives better feel than a power driver for kits and cases.
Last Updated: September 2026










Reviews
There are no reviews yet.