Search

In Stock

Screw Driver, Plastic Handle (Flat Type)

Parallel-Ground Tip: The tip is machined to a precise thickness and width to prevent "cam-out" (slipping out of the slot), which protects both the screw head and the surrounding material.

High-Impact Acetate Handle: The plastic handle is resistant to grease, oil, and common laboratory chemicals. Its fluted or hexagonal design provides a non-slip grip and prevents the tool from rolling off inclined workbenches.

₹125.00

Quick Answer: A flat screwdriver has a blade that ends in a flat, wedge-shaped tip made to fit slotted screws, fitted here in a plastic handle. The flat screwdriver turns slotted screws on apparatus terminals, fittings and furniture.

Fitting the Slot Properly

A slotted screw has a single straight groove, so the blade transmits all the turning force through two narrow faces. Fit matters more than with any other screw type: the tip should be about as wide as the slot is long and should sit in the slot without rocking. A tip that is too narrow concentrates the force on a small area and twists out; one that is too wide sticks out past the head and scrapes the surrounding surface or terminal block.

Slotted screws remain common on physics apparatus. Terminal screws on rheostats, plug keys and switches, binding posts, battery holders and many older meters use a slot, as do many hinge screws and electrical fittings. A medium blade on the prep-room bench handles most of these, and the size of this model can be confirmed with LabEquip.

The plastic handle gives a comfortable grip for general work. Unless it is marked and rated for live electrical work it is not insulation, so equipment must be switched off and unplugged first. For cross-head screws, the matching Phillips type screwdriver is the companion tool.

Applications

  • Tightening terminal screws on rheostats, plug keys and binding posts
  • Fitting and adjusting hinges, catches and fittings on lab cabinets
  • Connecting conductors to terminal blocks on isolated equipment
  • Adjusting slotted screws on older meters and apparatus

Specifications

Tip Flat (slotted) blade
Handle Plastic
Fits Slotted screws, including terminal screws on apparatus
Electrical use Not for live work unless marked and rated
Blade width and length Confirm at enquiry

Care & Handling

  • Hold the blade upright in the slot and press in while turning.
  • Do not use the screwdriver as a chisel, scraper or lever, which chips or bends the tip.
  • Dress a rounded tip square on a grinding wheel or stone, keeping it cool, or replace the driver.
  • Keep the handle clean and dry for a secure grip.

Why Choose LabEquip

Physics labs, electrical training rooms and maintenance staff keep flat screwdrivers in several widths for the slotted screws on apparatus. LabEquip supplies this one through its general lab products; list the widths you need on the contact page.

Frequently Asked Questions

How do I pick the right blade width for a slotted screw?

Choose a blade whose tip is about as wide as the slot is long and fits the slot’s thickness snugly. Too narrow a blade twists out; too wide a blade damages the surrounding surface.

Why does my screwdriver keep slipping out of the slot?

The tip may be worn or rounded, too small, or held at an angle. Use a square, sharp tip that fits the slot and press firmly into the screw while turning.

Is the plastic handle insulated?

Only if the screwdriver is marked and rated for live work. A plain plastic handle is a grip, not a safety barrier, so isolate equipment before working on it.

Can I sharpen a worn flat tip?

Yes. Grind the tip faces lightly so they are flat and parallel and the end square, keeping the steel cool with water so it does not lose its hardness. Do not grind it to a knife edge.

What is the difference between a flared and a parallel tip?

A flared tip is wider than the shank and grips well on exposed screws. A parallel, or cabinet, tip is no wider than the shank, so it can follow a screw into a counterbored hole.

Can a flat blade turn cross-head screws?

It may turn a loose one, but it damages the recess and slips easily. Use a cross-head driver of the right size for Phillips or Pozi screws.

Last Updated: September 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)