Search

In Stock

Rack for stirring system of water bath WTB

₹1,450.00

Quick Answer: The Rack for stirring system of water bath WTB is a two-tier test tube rack, pictured in a dark finish with rows of holes in its top and middle plates and windowed side walls, that fixes to the moving frame of a WTB water bath shaking system so tubes are shaken while they incubate.

Stirring System or Shaking System?

The title says stirring system, but the accessory it belongs to shakes rather than stirs: the phrase comes from the French système d’agitation, which covers both. In English the right term is shaking system, a unit that moves a frame to and fro inside a WTB water bath, the Memmert bath series. This rack is the part that carries test tubes on that frame.

The photo shows a rigid rack with a perforated top plate and a second perforated plate below it, joined by side walls with rectangular windows and outward-turned top edges. A moving rack needs this rigidity: each tube is held at two heights so it cannot rattle or tip as the frame changes direction, and the windows let water pass through so the tubes stay at bath temperature.

For static work on the tank floor, the stainless steel rack for WTB water baths is the simpler choice. The rack here only makes sense with the agitation device for water baths fitted, and the number of tube positions depends on the rack size ordered.

Specifications

Type Test tube rack for a water bath shaking system
Made for WTB water baths with shaking system, as titled
Form Two perforated plates joined by windowed side walls, as pictured
Finish Dark finish, as pictured
Tube holding Each tube located at two heights
Positions and tube diameter Confirm at enquiry

Shaken Tube Work

  • Tube cultures of bacteria or yeast that need mixing and warmth together
  • Enzyme and binding assays in tubes where contents must not settle
  • Small-scale extractions shaken in capped tubes at a fixed temperature
  • Keeping cell suspensions evenly mixed during timed incubations

Care & Handling

  • Fix the rack firmly to the shaking frame before switching on, and check the fixings after the bath has been moved.
  • Use capped tubes, or keep liquid well below open rims, because shaking splashes.
  • Rinse the rack after use and let water drain from the windows and plates before storing it dry.

Why Choose LabEquip

Laboratories adding tube work to a WTB bath with a shaking system buy this rack to hold tubes safely on the moving frame. LabEquip lists it in General Lab Products; tell us your WTB model and tube size through the contact page.

Frequently Asked Questions

Why does the title say stirring system?

It is a translation of the French système d’agitation, which here means a shaking system. The rack mounts on the frame that shakes samples inside a WTB water bath; nothing in it stirs.

Can this rack be used without the shaking system?

It can stand in the bath, but it is built to fix onto the moving frame. For static use, a floor rack made for the WTB tank is simpler and usually holds tubes at a better height.

Why are the tubes held at two levels?

A moving rack must stop tubes rattling or tipping each time the frame changes direction. Holding each tube at two heights keeps it upright and steady.

Should tubes be capped?

Yes, whenever possible. Shaking throws liquid up the tube walls, and open tubes can splash or take in bath water.

What are the windows in the side walls for?

They let water flow through the rack as it moves, so tubes in the middle stay at the same temperature as those at the edges.

Does a full rack affect the shaking speed?

A full rack adds weight to the frame. Load it evenly and raise the speed gradually, watching for tubes that move in their holes.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)