Search

In Stock

HCP Humidity Control System

$717.32

Quick Answer: The HCP humidity control system is a benchtop laboratory cabinet, pictured with a front-opening door and a control panel above it, that sets the relative humidity and temperature around the samples inside. It is used for moisture-sensitivity tests, accelerated ageing and conditioning.

Humidity Control and Why It Matters in Testing

Moisture changes many materials. Tablets soften or break up faster, powders cake, adhesives lose strength, circuit boards corrode and paper changes dimension. A humidity cabinet lets a lab hold a chosen humidity steady, so these effects can be measured under repeatable conditions instead of whatever the weather brings.

Temperature and humidity are linked. Air that cools while its water content stays the same rises in relative humidity until it reaches the dew point, where water condenses. A sound test plan therefore sets both values and avoids sudden cold surfaces. Samples brought from a cold store into a warm, humid cabinet collect condensation, so let them reach room temperature first.

The photograph shows a benchtop cabinet built in the style of a laboratory oven, which separates this item from the floor-standing SP climate chamber in the same range. The title does not expand the letters HCP or state the control ranges; ask LabEquip for the humidity and temperature limits and the water supply arrangement before ordering.

Test Applications

  • Moisture-uptake tests on pharmaceutical tablets, capsules and powders
  • Accelerated ageing of adhesives, coatings and polymer samples
  • Humidity exposure of electronic components and printed boards before inspection
  • Conditioning paper, textile and leather test pieces before measurement

Care & Good Practice

  • Let cold samples reach room temperature before loading so they do not collect condensation
  • Fill or connect the humidifier water as the manual directs, and drain it if the unit will stand unused
  • Verify humidity with a separate thermometer with dew point display placed among the samples
  • Clean the interior with a mild detergent and dry it after high-humidity runs

Specifications

Product Humidity control system (benchtop humidity cabinet)
Model name in title HCP
As pictured Front-opening cabinet with control panel above the door
Controls Relative humidity and temperature
Control ranges and water supply Confirm at enquiry

Why Choose LabEquip

Quality-control labs in pharmaceuticals, electronics and packaging buy a benchtop humidity system when they need controlled moisture testing on a modest scale. LabEquip supplies the HCP system with matching shelves from its general lab products range; send the conditions your test method needs via the contact page.

Frequently Asked Questions

What is the dew point and why does it matter?

The dew point is the temperature at which air becomes saturated and water starts to condense. If a surface inside the cabinet, or a sample, is colder than the dew point, it gets wet, which spoils most humidity tests.

How is a humidity cabinet different from a desiccator?

A desiccator keeps samples dry with a drying agent but cannot hold a chosen humidity. A humidity control system adds or removes moisture to keep a set value, so it can test samples under dry, moderate or humid conditions.

Can saturated salt solutions replace a humidity cabinet?

For small samples, a sealed container over a saturated salt solution gives a fixed humidity and makes a good teaching method. A cabinet is more practical when larger loads, changing set points or temperature control are needed.

What water should be used in the humidifier?

Use the water quality stated in the unit’s manual, usually purified or demineralised water. Dissolved minerals in tap water leave deposits in the humidifier and can reduce control accuracy.

Why do my samples gain weight in the first hours?

Hygroscopic samples absorb moisture until they reach equilibrium with the cabinet air. Weigh at intervals until the mass stops changing, then record that as the equilibrium value for the test condition.

Can the HCP cabinet be used for drying samples?

If its control range reaches low humidity, it can dry samples gently, but it is not a drying oven. For removing water quickly at high temperature a hot air oven is the usual tool, while this system is for controlled exposure.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)