Quick Answer: The Bunsen burner support is a shiny wire frame, as pictured, with a ring at the top and a triangular base plate that has a central opening. It holds wire mesh or a small vessel at a set height above a Bunsen burner flame.
How This Support Differs from a Tripod
A tripod stands on the bench and the burner is pushed underneath it. The frame in the photograph is built differently: its base is a flat triangular plate with a round opening, joined by bent wire uprights to a ring at the top. A frame of this shape is generally positioned so the burner tube rises through or directly beneath that opening, keeping the ring centred over the flame so support and burner work as one compact unit.
Centring is the practical benefit. With a tripod, students often nudge the burner off-centre, so the flame heats one side of the gauze. A frame that keeps ring and burner aligned reduces that error and gives a similar heating height from bench to bench, which helps when a class compares heating times.
The open wire sides also leave the flame easy to see, so students can check that it is blue, and adjust the air hole, without dismantling the set-up. Compared with a tripod, the frame takes less bench space but carries lighter loads.
Specifications
| Product | Bunsen burner support frame |
| Design as pictured | Top ring, bent wire uprights, triangular base plate with central opening |
| Holds | Wire mesh with a small beaker or flask, or a small dish |
| Works with | Bunsen and similar laboratory burners |
| Fit to your burner model | Confirm at enquiry |
Care & Handling
- Use wire mesh under glassware; never stand glass directly on the bare ring
- Keep loads small: this is a light support, not a stand for large water baths
- Let the frame cool before removing it from the burner, since the ring and upper wires get hot
- Wipe off soot and keep the wires straight so the ring stays level
Applications
- Boiling small volumes of water or solution in a beaker on gauze
- Warming a small dish of wax or water in biology practicals
- Class comparisons of heating rates that need the same flame-to-vessel distance at every bench
- Demonstrations where the flame must stay visible to the class
Why Choose LabEquip
Teachers who want quick, repeatable heating set-ups on every bench order the burner support together with burners and gauze. LabEquip offers it in its general lab products range with burners such as the laboratory burner, and the contact page can be used to check the fit with burners you already have.
Frequently Asked Questions
Is the Bunsen burner support a replacement for a tripod?
For small beakers and dishes it does the same job in less bench space. For heavy loads, crucibles in pipeclay triangles or wide evaporating basins, a tripod gives a larger, steadier base.
Do I still need wire mesh with this support?
Yes, when heating glassware. The mesh spreads the flame’s heat across the base of a beaker or flask and gives it a flat seat on the ring. Without it the flame strikes one spot on the glass.
Will the support fit my existing burners?
Burners vary in base size and barrel diameter, so compare your burner with the base opening before ordering. LabEquip can give the frame’s dimensions if you send your burner model.
Can the support be used with a spirit lamp?
It depends on whether the lamp fits the base. A spirit lamp’s flame is shorter and cooler than a Bunsen flame, so the ring may sit too high for efficient heating. A tripod of suitable height is often easier with spirit lamps.
How hot does the frame get?
The ring and upper wires sit in hot flame gases and become too hot to touch within a minute or two. Handle the frame with tongs, or leave it to cool on a heatproof mat after the burner is turned off.
Why does the open design help with safety?
The open wire sides let students see whether the flame is blue or yellow and whether it has gone out. A flame that has blown out with the gas still on is a hazard, so being able to check at a glance is useful.
Last Updated: October 2026










Reviews
There are no reviews yet.