Quick Answer: A borosilicate thistle funnel is a long glass tube with a thistle-shaped cup at the top, made from low-expansion borosilicate glass. It is used to add liquid to a closed flask while its lower end stays under the liquid surface, most often in gas preparation set-ups that may be warmed.
The Thistle Funnel in a Gas Generator
In a typical gas preparation, a flask holding a solid reactant is closed with a two-hole bung. One hole carries the delivery tube; the other carries a thistle funnel whose tube reaches almost to the bottom of the flask. Acid is poured into the cup and runs down the tube, and as long as the tube end stays below the liquid surface, the gas produced cannot escape upwards and must leave by the delivery tube. This liquid seal is the reason for the long tube.
The funnel also acts as a simple safety valve. If the delivery tube becomes blocked, pressure in the flask pushes liquid back up the thistle tube, which is visible and warns the user before pressure can build dangerously. The bulb-shaped cup gives room for that rise and for acid to be poured in without spilling.
Borosilicate glass has low thermal expansion, so borosilicate laboratory glassware tolerates warming and temperature changes better than ordinary soda-lime glass. That matters when the generating flask is heated to start or sustain a reaction, or when hot liquid is poured in. For cold class preparations, the clear glass thistle funnel is the simpler alternative.
Specifications
| Material | Borosilicate glass, as named in the title |
| Form | Thistle-shaped cup on a long glass tube |
| Function | Adds liquid below the surface to keep a liquid seal |
| Fits | One hole of a two-hole rubber bung in a flask or bottle |
Care & Handling
- Lubricate with water or glycerol when inserting the tube into its bung, grip the stem near the rubber with a cloth wrapped round your hand, and never push on the cup.
- Keep the lower end of the tube below the liquid surface throughout the preparation.
- Heat the generating flask, not the funnel, and let the apparatus cool before dismantling it.
- Rinse the long tube with water straight after use so acid does not dry inside it.
Applications
- Gas generators in which the reaction flask is warmed, where heat resistance reduces the risk of cracking
- Adding liquid reagents to a heated flask during a reaction without opening the apparatus
- Acting as a pressure indicator in gas generation, showing a blockage as a rising liquid column
- College laboratories that standardise on borosilicate for all glassware used near heat
Why Choose LabEquip
College chemistry laboratories, and schools that prefer heat-resistant glass for any set-up near a burner, choose this version of the thistle funnel. LabEquip offers it among its chemistry lab equipment; send quantities and tube length through the contact page.
Related Products
- Thistle Funnel, Clear Glass: A clear glass thistle funnel for room-temperature gas preparations and osmosis demonstrations.
- Cork Stopper, Rubber, Two Holes: A two-hole rubber stopper that takes a thistle funnel and a delivery tube side by side.
- Tubes, Delivery: Bent glass delivery tubes that carry the gas from the flask to the collecting jar.
- Kipps Gas Generating Apparatus, Borosilicate Glass: A borosilicate Kipps gas generator that supplies gas on demand without a thistle funnel.
Frequently Asked Questions
Why must the end of the thistle tube stay under the liquid?
In a gas generator, the liquid covering the lower end of the thistle tube forms a seal, so gas cannot escape up the tube and must leave by the delivery tube. If the level drops below the end, gas escapes through the funnel and collection stops.
What is the advantage of a borosilicate thistle funnel?
Borosilicate glass expands very little when heated, so it tolerates warm reaction mixtures and temperature changes better than ordinary glass. The borosilicate thistle funnel suits gas preparations where the flask is warmed.
Can a thistle funnel control the rate at which acid is added?
Only roughly: acid poured into the cup runs down as fast as the tube allows. Add it in small portions and wait between additions. For steady, controlled addition, a dropping funnel with a tap is the better choice.
Why did liquid rise up the thistle tube during a gas preparation?
Liquid rising in the thistle tube means pressure is building in the flask, usually because the delivery tube is blocked or kinked or its end is too deep under water. Stop adding acid and clear the delivery path; the visible rise is a useful warning.
How is a thistle funnel fitted into a rubber bung safely?
Wet the stem and the hole with water or a little glycerol, hold the stem close to the bung with a cloth round your hand, and push with a gentle twisting motion. Never push by the cup, which can snap off.
Why does a thistle funnel have a wide cup at the top?
The cup makes it easy to pour acid in without spilling and gives room for liquid that is pushed back up the tube if pressure rises in the flask, so it does not overflow straight away.
Last Updated: November 2026










Reviews
There are no reviews yet.