Quick Answer: A reflux assembly is a round-bottom flask fitted with a vertical water-cooled condenser, used to heat a reaction mixture at its boiling point for an extended time. Vapour condenses and drips back into the flask, so no solvent or volatile reactant is lost while the reaction proceeds.
Heating for Hours Without Boiling Dry
Many organic reactions are slow at room temperature and need prolonged heating, but the mixture often contains volatile or flammable components that an open vessel would lose. Here the condenser stands upright on the flask, so vapour rising from the boiling mixture is cooled on the condenser walls and runs straight back down. The mixture can then be held at a steady temperature, set by the boiling point of the solvent, for as long as the reaction requires.
The set-up is simple: a round-bottom flask, anti-bumping granules or a stirrer bar, a condenser attached through a ground glass joint, and a heat source such as a heating mantle, water bath or oil bath. The top of the condenser is left open to the air, sometimes with a drying tube if moisture must be kept out.
Straight, bulb and coil condensers can all be used; the bulbous Allihn condenser is a common choice because of its large cooling surface. Moving the condenser to a sloping position turns the same flask into part of a distillation apparatus.
Specifications
| Arrangement | Round-bottom flask with vertical condenser above it |
| Function | Prolonged heating at boiling point with condensed vapour returned |
| Condenser | Water-cooled; straight, bulb or coil pattern |
| Heat source | Heating mantle, water bath or oil bath |
Applications
- Oxidising ethanol to ethanoic acid with acidified potassium dichromate, a classic organic practical
- Preparing esters by heating an alcohol and a carboxylic acid with an acid catalyst
- Hydrolysing esters, amides or fats with aqueous alkali, including soap-making practicals
- Dissolving sparingly soluble solids in boiling solvent before recrystallisation
Care & Handling
- Never stopper the top of the condenser; a closed system under heating can burst.
- Add anti-bumping granules or a stirrer bar before heating, and use fresh granules if heating is interrupted.
- Adjust the heat so the ring of condensing vapour stays in the lower part of the condenser.
- Turn the cooling water on before heating begins, and off only once the flask is cool.
Why Choose LabEquip
Organic chemistry laboratories in colleges, pharmacy institutes and research groups use a reflux assembly for most syntheses, often one per student. It is stocked with LabEquip’s chemistry lab equipment; let us know your flask size and joint through the contact page.
Related Products
- Reflux Condenser: A finned air-cooled reflux condenser for set-ups without a cooling water supply.
- Condenser, Allihn: An Allihn bulb condenser, a common water-cooled condenser for upright reflux.
- Flask, Boiling, Round Bottom: A round bottom boiling flask, the usual vessel under a reflux condenser.
- Recovery Assembly: A solvent recovery assembly for distilling off the solvent once a reaction or extraction is done.
- Organic Chemistry Glassware Kit, 9 pieces: A 9-piece jointed organic glassware kit that assembles into a reflux set-up.
Frequently Asked Questions
What is the difference between reflux and distillation?
In reflux the condenser stands upright on the flask, so condensed vapour runs straight back into the mixture and nothing is collected. In distillation the condenser slopes away and the condensed liquid is collected in a separate receiver. Reflux heats a reaction; distillation separates its products.
Why is ethanol heated under reflux to make ethanoic acid?
Oxidising ethanol with acidified potassium dichromate first gives ethanal, which boils at a low temperature and would escape from an open flask. Under reflux the ethanal condenses and returns, staying in contact with the oxidising agent until it is oxidised further to ethanoic acid.
Why must the top of a reflux condenser stay open?
Heating a closed vessel builds pressure that can blow the apparatus apart. The open top keeps the set at atmospheric pressure. If moisture must be kept out, fit a drying tube rather than a stopper, so the set still breathes.
How long should a mixture be heated under reflux?
The time depends on the reaction and is given in the method, from a few minutes for fast reactions to several hours for slow ones. Time it from when the mixture starts to boil steadily, and keep the ring of condensing vapour in the lower part of the condenser.
Can a stirrer bar replace anti-bumping granules in a reflux set-up?
Yes, if a magnetic stirrer is available under the flask or mantle. Stirring breaks up large bubbles and mixes the reaction evenly. Without stirring, add fresh anti-bumping granules before heating, never to a liquid that is already hot.
Which condenser suits a reflux assembly?
A water-cooled condenser fitted vertically, often a bulb (Allihn) condenser for its larger cooling surface, or a straight Liebig condenser for gentle reflux. Water enters at the bottom connection and leaves at the top, so the jacket stays full.
Last Updated: November 2026









Reviews
There are no reviews yet.