Search

In Stock

Reduction Adapters, Reducing Interchangeable Joints

Standardized 1:10 Taper Precision: Every adapter features CNC-ground interchangeable joints with a high-vacuum matte finish, ensuring a hermetic seal and universal compatibility with international modular glassware standards.

Type I Class A Borosilicate Construction: Fabricated from 3.3 expansion glass, providing exceptional resistance to thermal shock and aggressive chemical reagents in high-temperature reflux or vacuum applications.

₹345.00

Quick Answer: A reduction adapter is a short piece of glass that steps a ground joint down in size: its wide cone enters a large neck, and a narrower socket above it accepts a smaller cone. That lets a component such as a thermometer adapter or small condenser sit in a flask neck of a bigger size.

Stepping Down a Joint Size

Laboratories often own flasks with large necks and accessories with smaller joints. This fitting handles exactly that case. The wide cone at its base goes into the big socket of the flask or still head, and the narrow socket at its top receives the smaller cone of whatever must be fitted. Typical examples are a small reflux condenser on a large flask during a reaction that gives off little vapour, a thermometer adapter or stopper in a wide side neck, and a dropping funnel with a small joint on a large reaction flask.

The opposite fitting, with a small cone and a large socket, is the expansion adapter. The two names are easily confused, so describe the adapter by its ends: the cone size that goes down into the vessel and the socket size that receives the next piece.

Every adapter adds a joint and some height to the stack. A small condenser perched on a large flask through an adapter is top-heavy, so clamp the condenser as well as the flask.

Care & Handling

  • Grease or sleeve both joints, since two joints in place of one give the set twice as many places to leak.
  • Clip both joints; the smaller upper one in particular can pull out under the weight of a condenser.
  • Separate the adapter from both partners after use, as a joint left assembled with basic solution can seize.

Applications

  • Fitting a small condenser or air condenser to a large round-bottomed flask
  • Placing a small-cone thermometer adapter or stopper in a wide flask neck
  • Using semi-micro accessories with standard-size flasks
  • Combining glassware bought at different times with different joint sizes

Specifications

Base Wide ground-glass cone for the larger neck
Top Narrower ground-glass socket for the smaller component
Purpose Steps a joint down by one or more sizes
Fitting for the reverse case Expansion adapter

Why Choose LabEquip

Labs whose glassware has grown piece by piece, with mixed joint sizes, rely on fittings like this to keep older and newer items working together. LabEquip lists them in its chemistry lab equipment range; state both joint sizes on the contact page.

Related Products

Frequently Asked Questions

What is a reduction adapter used for?

It steps a ground joint down in size. Its wide cone fits into a large neck and its narrower socket accepts a smaller cone, so a thermometer adapter, small condenser or dropping funnel with a small joint can sit in a flask or still head with a bigger neck.

Is a reduction adapter the same as an expansion adapter?

No, they are opposites. A reduction adapter goes from a large cone down to a small socket; an expansion adapter goes from a small cone up to a large socket. Describe the fitting by its ends, the cone that goes into the vessel and the socket that receives the next piece.

How are the sizes of a reduction adapter written?

Give the cone size first, the end that goes into the larger neck, then the socket size that takes the smaller component. For example, a fitting described by a large cone and small socket pair steps one standard joint size down to another.

Does adding a reduction adapter affect the seal?

It adds a second joint, so there is one more surface that can leak. For normal-pressure work clean, dry joints are usually fine. For vacuum, grease both joints lightly and hold them with clips so the extra joint does not let air in.

Why use a reduction adapter instead of a flask with the right neck?

Laboratories often own flasks with large necks and accessories with smaller joints, collected over years. An adapter lets that existing glassware work together without buying a duplicate set of flasks for every joint size.

Can a reduction adapter carry a heavy condenser?

The adapter adds height and leverage, so a heavy condenser on top can strain the joints. Clamp the condenser to the retort stand separately and let the adapter only make the connection, never carry the weight.

Last Updated: November 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)