Search

In Stock

Receiver Adapter, Bent With Socket Connection

Precision-Ground Standard Taper Sockets: Manufactured with a rigorous 1:10 taper ratio to achieve a high-vacuum matte finish, ensuring hermetic, leak-proof seals when integrated with modular glassware.

Optimized Flow Geometry: Features a reinforced 105° angled delivery stem with a fire-polished drip tip designed to facilitate consistent droplet formation and prevent liquid backflow during condensation.

$5.14

Quick Answer: A bent receiver adapter with socket connection is a curved glass distillation fitting whose ground-glass socket receives the cone at the outlet of a condenser. The bend turns the sloping line of the condenser downwards, so the distillate runs into a receiving flask standing below.

Why the Condenser End Is a Socket

Ground joints in a distillation train are arranged so that liquid always passes from a cone into a socket. The outlet of a Liebig or Allihn condenser ends in a cone; the socket of this adapter slides over it, and condensate leaving the cone tip lands on the inner wall of the adapter below the ground zone. Were the parts reversed, liquid would run over the outside of the cone and seep through the joint, dissolving any grease and dripping outside the apparatus.

On bends of this family that end is either a ground cone for a jointed receiver or a plain drip tube for an open flask or measuring cylinder. The socket size is not given either, and it has to match the condenser cone exactly, because ground joints of different sizes do not seal.

No side tube is named, so if the receiver is fitted onto a cone at the lower end, the apparatus needs an opening to the air somewhere else. Delivering through a drip tube into an open vessel avoids that question altogether.

Specifications

Type Bent receiver adapter
Upper connection Ground-glass socket for the condenser outlet cone
Flow path Bend turning the distillate down into the receiver
Side tube None named in the title

Applications

  • Joining a Liebig condenser to a receiver in simple distillation of water or solvents
  • Taking distillate from a steam distillation into an open collecting flask
  • Replacing the bend in an existing ground-joint distillation kit
  • Demonstrating correct joint direction when students assemble apparatus

Care & Handling

  • Clamp the condenser rather than the adapter; the bend should hang from the condenser cone with a joint clip, while the receiver stands on its own support.
  • Wipe grease out of the socket with a tissue moistened with a little acetone before washing, so it is not smeared over the whole piece in the sink.
  • Inspect the inner edge of the socket for chips, which spoil the seal and can cut fingers.

Why Choose LabEquip

Chemistry departments assembling or repairing distillation sets order bends like this to fit condensers they already own. LabEquip supplies it with other chemistry lab equipments such as the Liebig condenser it connects to; send the condenser cone size through the LabEquip contact page so the socket matches.

Related Products

Frequently Asked Questions

Why does this receiver adapter have a socket at the condenser end?

Ground joints in a distillation train run cone into socket in the direction of flow. The condenser outlet ends in a cone, the adapter’s socket slides over it, and condensate leaving the cone tip lands on the inner wall of the adapter. Reversed, liquid would run over the outside of the cone and seep through the joint.

Why is a receiver adapter bent?

A distillation condenser usually slopes downwards at an angle. The bend turns that sloping flow so the distillate falls into a receiving flask standing upright below, instead of shooting out sideways from the end of the condenser.

Can this adapter be used with a receiver that has a ground-glass neck?

That depends on the delivery end. If it is a ground cone, a jointed receiver fits onto it, and the set then needs a vent elsewhere for work at normal pressure. If it is a plain drip tube, it is used with an open flask, beaker or measuring cylinder.

How do I keep the adapter on the condenser outlet?

A plastic joint clip over the cone and socket holds them together securely without stressing the glass. Do not rely on friction alone, because the weight of the adapter and the vibration of boiling can work the joint loose.

Should the socket of a receiver adapter be greased?

For ordinary distillation at normal pressure, a clean dry joint or a PTFE sleeve is usually enough, and leaving grease out keeps it from dissolving into the distillate. A very thin film on the upper part of the cone helps if the joint tends to stick.

Is a bent socket adapter suitable for vacuum distillation?

No side tube is named for this adapter, so there is nowhere to connect the pump. For reduced-pressure work, choose a receiver adapter with a vacuum connection, which joins the line after the condenser.

Last Updated: November 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)