Quick Answer: A bent receiver adapter with socket connection is a curved glass distillation fitting whose ground-glass socket receives the cone at the outlet of a condenser. The bend turns the sloping line of the condenser downwards, so the distillate runs into a receiving flask standing below.
Why the Condenser End Is a Socket
Ground joints in a distillation train are arranged so that liquid always passes from a cone into a socket. The outlet of a Liebig or Allihn condenser ends in a cone; the socket of this adapter slides over it, and condensate leaving the cone tip lands on the inner wall of the adapter below the ground zone. Were the parts reversed, liquid would run over the outside of the cone and seep through the joint, dissolving any grease and dripping outside the apparatus.
On bends of this family that end is either a ground cone for a jointed receiver or a plain drip tube for an open flask or measuring cylinder. The socket size is not given either, and it has to match the condenser cone exactly, because ground joints of different sizes do not seal.
No side tube is named, so if the receiver is fitted onto a cone at the lower end, the apparatus needs an opening to the air somewhere else. Delivering through a drip tube into an open vessel avoids that question altogether.
Specifications
| Type | Bent receiver adapter |
| Upper connection | Ground-glass socket for the condenser outlet cone |
| Flow path | Bend turning the distillate down into the receiver |
| Side tube | None named in the title |
Applications
- Joining a Liebig condenser to a receiver in simple distillation of water or solvents
- Taking distillate from a steam distillation into an open collecting flask
- Replacing the bend in an existing ground-joint distillation kit
- Demonstrating correct joint direction when students assemble apparatus
Care & Handling
- Clamp the condenser rather than the adapter; the bend should hang from the condenser cone with a joint clip, while the receiver stands on its own support.
- Wipe grease out of the socket with a tissue moistened with a little acetone before washing, so it is not smeared over the whole piece in the sink.
- Inspect the inner edge of the socket for chips, which spoil the seal and can cut fingers.
Why Choose LabEquip
Chemistry departments assembling or repairing distillation sets order bends like this to fit condensers they already own. LabEquip supplies it with other chemistry lab equipments such as the Liebig condenser it connects to; send the condenser cone size through the LabEquip contact page so the socket matches.
Related Products
- Receiver Adapter, Bent With Vacuum Connection, Socket To Cone: A bent receiver adapter with the same socket at the top plus a vacuum side tube and a cone for the receiver.
- Receiver Adapter, Bent With Vent, Socket To Cone: A bent socket-to-cone adapter with a vent, so a jointed receiver can be sealed on at normal pressure.
- Receiver Adapter, Vertical Delivery, Socket To Cone: A vertical delivery adapter, socket to cone, that holds a jointed receiver upright beneath it.
- Still Heads/ Splash Heads: Still heads and splash heads for the other end of the distillation train, between flask and condenser.
Frequently Asked Questions
Why does this receiver adapter have a socket at the condenser end?
Ground joints in a distillation train run cone into socket in the direction of flow. The condenser outlet ends in a cone, the adapter’s socket slides over it, and condensate leaving the cone tip lands on the inner wall of the adapter. Reversed, liquid would run over the outside of the cone and seep through the joint.
Why is a receiver adapter bent?
A distillation condenser usually slopes downwards at an angle. The bend turns that sloping flow so the distillate falls into a receiving flask standing upright below, instead of shooting out sideways from the end of the condenser.
Can this adapter be used with a receiver that has a ground-glass neck?
That depends on the delivery end. If it is a ground cone, a jointed receiver fits onto it, and the set then needs a vent elsewhere for work at normal pressure. If it is a plain drip tube, it is used with an open flask, beaker or measuring cylinder.
How do I keep the adapter on the condenser outlet?
A plastic joint clip over the cone and socket holds them together securely without stressing the glass. Do not rely on friction alone, because the weight of the adapter and the vibration of boiling can work the joint loose.
Should the socket of a receiver adapter be greased?
For ordinary distillation at normal pressure, a clean dry joint or a PTFE sleeve is usually enough, and leaving grease out keeps it from dissolving into the distillate. A very thin film on the upper part of the cone helps if the joint tends to stick.
Is a bent socket adapter suitable for vacuum distillation?
No side tube is named for this adapter, so there is nowhere to connect the pump. For reduced-pressure work, choose a receiver adapter with a vacuum connection, which joins the line after the condenser.
Last Updated: November 2026









Reviews
There are no reviews yet.