Quick Answer: A receiver adapter with multiple connection is a bent glass fitting that takes the outlet of a distillation condenser and carries more than the usual pair of joints. The extra connections let one bend serve a side tube, a second receiver or a vent, depending on the pattern supplied.
What Multiple Connection Means on a Bend
An ordinary receiver bend has two ends: a joint that takes the condenser outlet and a delivery end that enters the receiving flask. This listing describes a bend with multiple connection, meaning additional joints or tubes are built onto it. In glassware catalogues the name is used both for bends that add a side tube for vacuum or venting next to the delivery joint, and for bends that split the distillate path towards more than one receiver.
That is the one detail this page cannot state with certainty.
Whatever the layout, the principle is the same. Condensate runs down the inside of the bend under gravity, and every extra opening must be connected, deliberately vented or closed with a stopper so the distillate goes where it is meant to. An opening left open by mistake lets a volatile distillate evaporate; one closed by mistake can seal a heated apparatus.
Applications
- Collecting two or more fractions from one distillation without dismantling the condenser end
- Distilling with a side connection used for a vent, a drying tube or a vacuum line beside the delivery joint
- Showing students how a distillation train is completed after the condenser
- Replacing a broken bend in an existing set-up with the same connection pattern
Specifications
| Type | Bent receiver adapter for distillation |
| Connections | More than one outlet or side connection besides the condenser joint |
| Condenser end | Ground-glass joint for the condenser outlet |
Care & Handling
- Support each receiving flask from below with a cork ring or lab jack; a bend with several receivers on it carries far more weight than one flask.
- Before heating, trace every connection and make sure the intended route to the air or to the vacuum line is open.
- Clean narrow side limbs with a pipe-cleaner-type brush and a solvent rinse so no residue carries into the next fraction.
- Close unused openings with a matching glass stopper rather than tape or foil.
Why Choose LabEquip
Colleges running organic preparation practicals and quality-control labs that separate fractions tend to order this bend together with matching receivers. LabEquip lists it in the chemistry lab equipment range alongside the multi-limb vacuum receiver adapter used when fractions must be changed under reduced pressure; describe the connections you need on the contact page.
Related Products
- Receiver Adapter, Multi-Limb Vacuum: A multi-limb vacuum adapter that sends fractions to several receivers by rotation without breaking the vacuum.
- Receiver Adapter, Bent With Vacuum Connection, Socket To Cone: A bent vacuum receiver adapter with one side tube, socket to cone, for single-receiver vacuum work.
- Receiver Adapter, Bent With Vent, Socket To Cone: A bent vented adapter for a sealed receiver at normal pressure, with an opening to the air.
- Miscellaneous Fittings: Miscellaneous fittings such as T-pieces and stoppers for closing or joining spare outlets.
Frequently Asked Questions
What is a receiver adapter with multiple connection used for?
It is a bent glass fitting at the condenser outlet that carries extra joints or tubes besides the usual condenser joint and delivery end. Depending on the pattern, the extra connections serve a side tube for vacuum or venting, or split the distillate path towards more than one receiver.
Where does a multiple-connection receiver adapter fit in a distillation set?
It sits at the end of the train: its condenser joint takes the outlet of the condenser, and its delivery end and extra outlets lead to the receiver or receivers below. Nothing comes after it except the collecting vessels and, if used, the vacuum or vent line.
How do I close an outlet on the adapter that I am not using?
Close a ground-joint outlet with a stopper of the matching size, and a hose outlet with a short piece of tubing and a pinch clamp. When working at normal pressure, always leave at least one route to the atmosphere open, because heating a fully closed apparatus is dangerous.
Can a multiple-connection receiver adapter be used under vacuum?
It can if one connection is a hose outlet that takes thick-walled vacuum tubing and every other opening is sealed. Use only round-bottomed or pear-shaped receivers under vacuum, check all glass for cracks first, and work behind a safety screen.
Do the receivers on a multiple-outlet adapter need their own support?
Yes. Each receiving flask should be clamped or rest on a support, rather than hanging from a ground joint. The weight of a filling flask can pull a joint apart or crack the adapter, especially when several receivers hang from one fitting.
When should I change over to the next receiver?
Watch the thermometer at the still head. A steady temperature marks one fraction distilling; when it starts to rise or fall away, that fraction is finished, so switch the distillate to a fresh receiver and label each one with its temperature range.
Last Updated: November 2026










Reviews
There are no reviews yet.