Search

In Stock

Hofmann Electric Burner Guard

₹2,530.00

Quick Answer: The Hofmann electric burner guard is a perforated metal cylinder that fits around the heating core of the Hofmann electric burner. The listing photo shows an open-topped cage with inward-bent prongs at the rim for resting a vessel, and a solid band around the base.

Why the Hofmann Burner Needs a Guard

The Hofmann burner has an exposed upright core that glows when hot, much like the barrel of a gas burner but without a flame to warn anyone. This electric burner guard places a perforated cylinder around that core, so a hand or sleeve brushing past meets the cage rather than the heating element.

The top of the guard carries short prongs bent inwards, which act as pan supports. A small beaker or evaporating dish can rest on them directly above the heat, doing the job a tripod and gauze would do over a gas burner. The perforated wall lets heat escape instead of building up inside the cylinder.

The guard is listed for the Hofmann electric burner and is shown fitted to it in that listing’s photo. Other burners in this range have differently shaped protection, such as the open wire Serenit protection grid for the Serenit model, so each guard should be chosen by burner name.

Applications

  • Supervised lower-secondary practicals in which students heat liquids in small beakers
  • Concentrating a salt solution in an evaporating dish resting on the prongs before leaving it to crystallise
  • Shielding the heating core on shared benches where several groups work around one burner
  • Holding a small flask steady above the heat while a thermometer is read

Specifications

Item Guard for the Hofmann electric burner
Form Perforated metal cylinder, open at the top (photo)
Vessel support Prongs at the rim that act as pan supports (photo)
Finish Bright steel-coloured metal, as photographed
Fit Named for the Hofmann electric burner

Care & Handling

  • Fit or remove the guard only when the burner is off and cold.
  • Centre vessels on the prongs and keep them small enough not to overhang; an off-centre beaker can tip when its contents boil.
  • Soak boiled-over residues off in warm detergent solution once the guard is cool, instead of scraping at the perforations.
  • Check that the prongs remain level and undamaged; a bent support makes vessels unstable.

Why Choose LabEquip

Buyers of the Hofmann burner for school use usually add this guard, since it both shields the core and replaces a tripod for small vessels. LabEquip lists it in chemistry lab equipment; combined burner-and-guard requests can be sent through the contact page.

Related Products

Frequently Asked Questions

Why does the Hofmann electric burner need a guard?

The Hofmann burner has an exposed upright core that glows when hot but gives no flame to warn anyone. The perforated guard surrounds that core, so a hand or sleeve brushing past meets the cage rather than the heating element. Its rim prongs also give vessels somewhere to rest.

Can a beaker sit directly on the Hofmann burner guard?

Yes, the inward-bent prongs at the rim, shown in the listing photo, act as pan supports. A small beaker, evaporating dish or crucible can rest on them above the heat, doing the job a tripod and gauze would do over a gas burner. Keep the vessel centred and small enough not to overhang.

Does the guard make the Hofmann burner safe to touch?

No. The guard keeps fingers away from the element, but the metal cage itself becomes very hot during use. Handle vessels with tongs and let the burner and guard cool completely before touching them or packing them away.

Why is the burner guard perforated rather than solid?

The holes let heat and air escape instead of building up inside the cylinder, which would overheat the core and the cage. They also let the user see whether the core is glowing, which is a useful sign that the burner is on.

Will the Hofmann guard fit other electric burners?

It is listed for the Hofmann electric burner and shown fitted to it in that listing’s photo. Other burners in this range have differently shaped protection, such as cages or grids made for their own heating units, so use each guard with the burner it was made for.

How do I clean spilt solution off the burner guard?

Unplug the burner and let everything cool. Lift the guard off, wipe it with a damp cloth or wash it in warm water with a soft brush, then dry it fully before refitting. Check the core for spilt solid as well, and do not switch on until both are dry.

Last Updated: November 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)