Quick Answer: A separating funnel, also called a separatory funnel, is a glass vessel with a stopper at the top and a stopcock above an outlet stem at the bottom. It is used to separate two immiscible liquids, such as an organic solvent and water, and for liquid-liquid extraction, draining the lower layer out through the tap.
Extraction Between Two Liquids That Do Not Mix
Liquid-liquid extraction relies on a compound dissolving better in one liquid than in another. When an aqueous solution and an immiscible organic solvent are shaken together in the funnel, the compound distributes itself between them, and after the layers settle the denser one lies at the bottom. Opening the stopcock drains the lower layer; the upper layer is then poured out through the top so it is not contaminated by drops left in the stem.
Which layer is which depends on density, not on which liquid is organic. Diethyl ether, ethyl acetate and hexane float on water, while dichloromethane and chloroform sink below it. A few drops of water added to the funnel show which layer is aqueous by joining it.
Glass keys need a thin film of grease; PTFE keys run without grease but must not be overtightened. Support the funnel in a ring on a retort stand, with a conical flask beneath to collect each layer.
Applications
- Extracting iodine from aqueous solution into a non-polar solvent such as cyclohexane in class demonstrations
- Washing an organic product with sodium hydrogencarbonate solution and water during a synthesis work-up
- Separating an oil and water mixture in lessons on separation techniques
- Adding a reagent slowly to a reaction, with the tap used to control the flow
Care & Handling
- Close the stopcock and test it for leaks with water before adding the mixture.
- Vent often: invert the funnel, hold the stopper in, and open the tap with the stem pointing away from people, especially with volatile solvents or carbonate washes.
- Take the stopper out before draining, or the lower layer will stop flowing as a partial vacuum forms.
- After use, dismantle the stopcock for cleaning and store a glass key apart from its barrel so it cannot seize.
Specifications
| Item | Separatory funnel with top stopper, stopcock and outlet stem |
| Principle | Separation of immiscible liquids by density; solvent extraction |
| Support | Iron ring or funnel holder on a retort stand |
Why Choose LabEquip
Organic chemistry courses, pharmacy colleges and research groups use a separatory funnel in almost every synthesis work-up. It forms part of LabEquip’s chemistry lab equipment; say what capacity and stopcock type you need on the contact page.
Related Products
- Separatory Funnel, Plastic: A plastic separatory funnel for aqueous extractions where a dropped glass funnel is the main risk.
- Separatory Funnel Holder, Plastic: A plastic holder that keeps separating funnels upright and still while the layers settle and are drained.
- Flavor Synthesis and Purification kit: A flavour ester kit in which the crude product is washed and separated in a funnel like this one.
- Universal Retort Stand: A universal retort stand for mounting the funnel on a ring or holder at a convenient draining height.
Frequently Asked Questions
Is a separating funnel the same as a separatory funnel?
Yes, the two names describe the same piece of glassware: a vessel with a stopper at the top and a stopcock above an outlet stem. Separating funnel is the usual British and Indian school term, separatory funnel the common term in American textbooks and catalogues.
How do I know which layer in a separating funnel is organic?
Layers stack by density, not by type. Diethyl ether, ethyl acetate and hexane float on water, while dichloromethane and chloroform sink below it. If unsure, add a few drops of water and watch which layer they join; that is the aqueous one. Label beakers for both layers and keep them until the end.
Why must a separating funnel be vented while shaking?
Shaking warms the liquids slightly and mixes volatile solvents into the space above them, so pressure builds inside the stoppered funnel. Holding the funnel upside down with the stopper secured and opening the stopcock releases that pressure. Without venting, the stopper can blow out and spray the contents.
Why does liquid stop draining from the separating funnel tap?
Most often the stopper is still in place, so air cannot enter at the top to replace the liquid leaving through the stopcock. Remove the stopper, or turn it so its groove lines up with the vent hole, before draining. A blocked stem or a stiff stopcock key can also slow the flow.
What causes an emulsion in a separating funnel and how do I break it?
Shaking too hard, or solutions containing soaps or fine solids, can leave a cloudy middle zone instead of a sharp boundary. Waiting, swirling gently, adding saturated salt solution or filtering through a little glass wool usually breaks it. Next time, invert and rock the funnel gently rather than shaking it hard.
Should the stopcock of a separating funnel be greased?
A glass stopcock key needs a very thin film of suitable grease to turn smoothly and seal, applied away from the bore so it does not contaminate the liquid. PTFE keys are used without grease. Remove glass keys for storage, or wrap them with paper, so they do not seize in the barrel.
Last Updated: November 2026









Reviews
There are no reviews yet.