Search

In Stock

Expansion Adapters, Enlarging Interchangeable Joints

Standardized Taper Precision: Engineered with exact CNC-ground 1:10 taper ratios, these adapters ensure a high-vacuum matte finish for airtight, leak-proof interfaces across mismatched joint sizes.

Differential Thermal Resistance: Fabricated from Type I Class A borosilicate glass, maintaining structural integrity and dimensional stability during extreme temperature fluctuations common in high-reflux organic synthesis.

$4.74

Quick Answer: An expansion adapter is a short glass fitting with a small ground-glass cone at one end and a larger socket at the other. It enlarges a joint, letting a flask or vessel with a small neck accept a component with a bigger cone.

Bridging a Small Neck to a Larger Joint

Mixed joint sizes are common in any laboratory that has bought glassware over several years. A small round bottom flask may have a narrow socket, while the condenser, still head or dropping funnel that should sit on it has a larger cone. This fitting solves the mismatch: its small cone goes into the flask neck, and its wider socket above takes the larger component.

The reverse problem, fitting a small component into a large neck, needs a reduction adapter, which has a large cone below and a small socket above. The names are easy to confuse, so it helps to specify an adapter by its two ends: the cone size that will go into the flask and the socket size that will receive the next piece.

Each adapter adds height and a second joint to the stack, which increases leverage on the flask neck and adds another place for leaks. Clamp the component above the adapter as well as the flask, and secure both joints with clips. The joint sizes at each end are not stated in the listing; other glassware adapters are listed separately.

Specifications

Lower end Smaller ground-glass cone
Upper end Larger ground-glass socket
Function Enlarges a joint so a small neck accepts a larger cone
Opposite type Reduction adapter: large cone to small socket

Applications

  • Fitting a larger condenser onto a small round bottom flask for reflux
  • Using a larger still head or dropping funnel on a small reaction flask
  • Combining glassware bought at different times with mixed joint sizes
  • Small-scale preparations where little flasks meet standard-size condensers

Care & Handling

  • Clamp both the flask and the component above the adapter; never let the stack hang from the flask neck.
  • Clip each joint, since two joints in series double the chance of one slipping.
  • Read the size markings at both ends before assembly, so the cone goes into the smaller neck and the socket faces the larger component.
  • Clean both ground ends after use and store adapters in a padded box, apart from each other.

Why Choose LabEquip

College and research labs that have built up glassware in several joint sizes rely on enlarging adapters to keep older and newer pieces working together. This adapter is part of LabEquip’s chemistry lab equipment; give the cone and socket sizes you need on the contact page.

Related Products

Frequently Asked Questions

What is an expansion adapter used for in jointed glassware?

An expansion adapter is a short glass fitting with a small ground-glass cone at the bottom and a larger socket at the top. Its cone goes into a flask or vessel with a small neck, and its socket then accepts a condenser, still head or dropping funnel that has a bigger cone, so mismatched pieces can be joined.

What is the difference between an expansion and a reduction adapter?

An expansion adapter goes from small to large: a small cone below and a larger socket above, so a small neck can take a large component. A reduction adapter does the opposite, with a large cone below and a smaller socket above, so a small component can fit a large neck. Labs with mixed joint sizes usually keep both.

What do joint sizes such as 14/23 and 24/29 mean?

In the common metric designation, the first number is the diameter of the joint at its wide end in millimetres and the second is the length of the ground surface in millimetres. A 14/23 cone fits only a 14/23 socket. An expansion adapter is described by both of its joints, for example a 14/23 cone with a 24/29 socket.

Does adding an expansion adapter affect a distillation or reflux?

It adds height and one more joint to the set-up. The extra height can raise a still head, so check the thermometer bulb still sits level with the side arm, and clamp the assembly so the weight of the larger component does not rest on the small joint. Each extra joint is also one more place to check for leaks under vacuum.

Should the joints of an expansion adapter be greased?

For ordinary distillation and reflux, clean dry joints usually seal well enough and grease can contaminate the product. Use a thin film of grease, or a PTFE sleeve, for vacuum work and when hot alkali is present, because strong alkali can fuse ground-glass joints together. Wipe old grease off with a suitable solvent before storing.

How do you free an expansion adapter that has stuck in a flask?

Let the glass cool, then try twisting gently while pulling. If that fails, warm the outer socket briefly with warm water or a hair dryer so it expands slightly more than the cone inside, and twist again, wearing cut-resistant gloves. Avoid levering with tools or heating with a flame, which can crack the joint.

Last Updated: November 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)