Quick Answer: A steam distillation apparatus is a glass assembly in which steam from a separate generator is passed through a mixture, carrying volatile, water-immiscible compounds over into a condenser at temperatures below 100 °C. It is used to extract essential oils from plant material and to purify organic compounds that would decompose at their own boiling points.
Why Steam Lowers the Boiling Temperature
When two liquids that do not mix are heated together, each exerts its own vapour pressure regardless of the other. The mixture boils when the two vapour pressures together equal atmospheric pressure, which happens below the boiling point of either liquid alone. Blowing steam through a flask containing an oil or an organic compound therefore makes it distil with the water at under 100 °C, even when its own boiling point is well above 200 °C.
A typical steam distillation assembly has three stages. A generator flask boils water and carries a long safety tube dipping into the water, which acts as a pressure release if the steam path blocks. A delivery tube reaching nearly to the bottom of the sample flask bubbles steam through the mixture, and a condenser followed by a receiver collects the milky distillate of water and oil, which separates on standing.
Separating the oil from the water afterwards is usually done in a separating funnel or by solvent extraction. For a general-purpose set, compare the simple distillation assembly, and for continuous solvent extraction of solids see the Soxhlet extraction apparatus.
Specifications
| Principle | Co-distillation of immiscible liquids below 100 °C at atmospheric pressure |
| Main stages | Steam generator with safety tube, sample flask, condenser, receiver |
| Suited to | Volatile, water-immiscible compounds, including many essential oils |
| Product | Two-phase distillate of water and oil, separated afterwards |
Applications
- Extracting limonene from orange or lemon peel in organic chemistry practicals
- Isolating eugenol-rich clove oil from crushed cloves
- Separating 2-nitrophenol, which is steam-volatile, from 4-nitrophenol after nitration of phenol
- Pharmacognosy practicals on volatile oils from spices and leaves in pharmacy colleges
Care & Handling
- Check that the safety tube dips below the water in the generator before heating, and never close it off.
- Warm the sample flask gently as well, so that steam does not condense in it and flood the mixture.
- Keep the condenser water flowing strongly; steam carries a much larger heat load than an ordinary distillation.
- Disconnect the steam line from the sample flask before turning off the heat, so the mixture is not sucked back into the generator.
Why Choose LabEquip
Pharmacy colleges, food science departments and natural product researchers need a steam distillation apparatus for work on volatile oils. LabEquip supplies the assembly within its chemistry lab equipment; list the parts and sizes you require on the contact page.
Related Products
- Distillation Assembly, Simple Type: A simple distillation assembly for separating liquids that are stable at their own boiling points.
- Separatory Funnel, Plastic: A plastic separatory funnel for draining the water layer away from the oil collected in the receiver.
- Distillation Apparatus: A general distillation apparatus whose flask, condenser and receiver suit many separations.
- Vacuum Distillation Assembly: A vacuum distillation assembly, the other way to distil heat-sensitive compounds at lower temperature.
Frequently Asked Questions
How does a steam distillation apparatus work?
Steam from a separate generator is passed into a flask containing plant material or an organic mixture. The steam carries the volatile, water-insoluble compound out of the flask and into a condenser, where both condense together, and the receiver collects water with the oil or compound floating on it or dispersed through it.
Why does steam distillation take place below 100 °C?
When two liquids that do not mix are heated together, each exerts its own vapour pressure independently. The mixture boils when the two pressures together reach atmospheric pressure, which happens below the boiling point of either liquid alone. So a compound boiling well above 200 °C can distil with water at under 100 °C, without decomposing.
Which substances can be separated by steam distillation?
Steam distillation suits compounds that are volatile, do not mix with water and would decompose at their own boiling points. Typical examples are essential oils such as limonene from orange peel, eugenol from cloves and the oils of eucalyptus or lemongrass, and organic products such as phenylamine and 2-nitrophenol in laboratory preparations.
What is the safety tube on the steam generator for?
The safety tube is a long, open glass tube that dips into the water of the steam generator. If the outlet becomes blocked and pressure builds up, water is pushed up the tube instead of the vessel bursting. Water rising in the safety tube is a warning to stop heating and clear the blockage before continuing.
How is the oil separated from water after steam distillation?
If the oil forms a separate layer, run the distillate into a separating funnel and drain the water layer off. When the oil is dispersed as a milky emulsion, add a little salt to reduce its solubility in water, then extract it with a small volume of an organic solvent, dry the solvent layer and evaporate the solvent off.
Can water be added to the flask instead of using a steam generator?
Yes, for small preparations the sample can be boiled directly with water in the flask, which is simpler to set up. The drawback is that water runs out and must be topped up through a dropping funnel. A separate generator supplies steam steadily for a long run and avoids charring plant material against the hot flask wall.
Last Updated: November 2026










Reviews
There are no reviews yet.