Search

In Stock

Conical Flask, Plastic

High-Clarity Polymeric Construction: Engineered from medical-grade polypropylene (PP) capable of withstanding repeated autoclave sterilization cycles at 121°C without compromising dimensional integrity or transparency.

Reinforced Neck Geometry: Features a precision-molded rim designed to provide a secure, leak-proof interface with standard rubber stoppers or screw closures, facilitating safe agitation and long-term chemical containment.

$1.80

Quick Answer: A plastic conical flask is an Erlenmeyer-shaped flask moulded from plastic, with a flat base, sloping sides and a narrow neck. It is used for mixing, swirling and holding solutions where a glass flask could break, but it is not meant for flame heating.

Choosing a Plastic Conical Flask Over Glass

The shape is the same as the glass Erlenmeyer: a wide base for stability and a narrowing body that keeps liquid inside when it is swirled. What changes is the material. A plastic flask survives a drop onto the floor, weighs less when full, and is a sensible choice for younger classes, field work and any practical where broken glass would be the bigger hazard.

Polypropylene flasks are translucent and generally autoclavable at 121 °C, which suits media preparation and culture work. Polymethylpentene (TPX) flasks come close to glass in clarity and are also generally autoclavable. Polycarbonate is clear but is attacked by alkalis. The choice matters most for titration, where a cloudy wall makes a faint end point harder to see.

For boiling, refluxing or heating on a tripod and gauze, the glass Erlenmeyer flask remains the correct choice. Plastic flasks belong to room-temperature and moderate-temperature work, and to the storage of aqueous solutions.

Specifications

Item Conical (Erlenmeyer-pattern) flask with flat base and narrow neck
Material Plastic; resin (for example polypropylene or TPX) to be confirmed
Heating Not for direct flame or hot plate use
Typical uses Mixing, swirling, storing aqueous solutions, culture media

Care & Handling

  • Mix by swirling from the wrist while holding the neck; plastic walls flex slightly if the body is gripped hard.
  • Avoid scouring pads and abrasive powders, which scratch plastic and make it cloudy; use a soft brush and mild detergent.
  • Before autoclaving, confirm the resin and leave any closure loose.
  • Wipe off spills of acetone or chloroform promptly, and keep solvent use to liquids the resin is known to resist.

Where Plastic Conical Flasks Are Used

  • Class practicals with younger students, where dropped glassware is a real risk
  • Preparing and storing aqueous solutions, such as dilute salt or sugar solutions, for later lessons
  • Growing yeast or microbial cultures in an autoclavable flask plugged with cotton wool
  • Field sampling of pond or stream water, where glass is awkward to carry

Why Choose LabEquip

Schools and training labs that want fewer breakages at student benches often add plastic flasks alongside their glass stock. LabEquip lists this flask in its chemistry lab equipment range; send the capacity and resin you need through the contact page.

Related Products

Frequently Asked Questions

When is a plastic conical flask a better choice than a glass one?

A plastic conical flask suits work where breakage is the main risk: younger classes, field trips, practical exams with large groups and storing aqueous solutions on open shelves. It survives a drop, weighs less when full and keeps the familiar Erlenmeyer shape for swirling, but it gives up the heat resistance of glass.

Can a plastic conical flask be heated on a hot plate or over a burner?

No. This flask is not meant for direct flame or hot plate use, because plastic softens and can distort or melt where it touches a hot surface. To warm a solution in it, stand the flask in a warm water bath, or heat the liquid in a glass vessel and let it cool before pouring it in.

Can plastic Erlenmeyer flasks be autoclaved for culture media?

It depends on the resin. Polypropylene and polymethylpentene (TPX) flasks generally withstand autoclaving at 121 °C, while polystyrene and most clear polycarbonate grades do not handle repeated cycles well. Check the resin code moulded into the base, loosen any cap before the cycle and let the flask cool before handling.

Which liquids should not be kept in a plastic conical flask?

Plastic flasks of polypropylene resist water, most aqueous acids and alkalis and many alcohols, but some organic solvents, such as hydrocarbons and chlorinated solvents, can swell, soften or craze them over time. Strong oxidising acids also attack many plastics. Keep solvent work and hot concentrated acids in glassware.

Can a plastic conical flask be used for a titration?

Yes for most aqueous acid-base titrations, since the conical shape lets the solution be swirled without splashing. Polypropylene is translucent rather than glass-clear, so a pale end point can be harder to see; standing the flask on a white tile and comparing against a reference flask helps. Clearer TPX flasks show colour changes more like glass.

How should a plastic conical flask be cleaned without scratching it?

Wash it with warm water, a mild laboratory detergent and a soft flask brush, then rinse with distilled water and let it drain upside down. Avoid scouring powders and harsh pads: scratches make the wall cloudy and give residues and microbes places to cling, which matters most when the flask is used for media.

Last Updated: November 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)