Quick Answer: A clear glass conical flask is a flat-based, cone-shaped glass flask with a narrow cylindrical neck, used for titrations, mixing and holding solutions. The transparent wall lets students watch colour changes and dissolving solids, while the sloping sides keep the liquid in when it is swirled.
Reading Colour Changes Through a Clear Glass Wall
The conical flask is the vessel in which most school titrations finish. Its flat base stands on a white tile beneath the burette, the sloping sides turn the liquid back on itself when the flask is swirled by hand, and the narrow neck catches splashes that an open beaker would lose. In a clear glass conical flask the end point colour, such as the first permanent pink of phenolphthalein or the orange of methyl orange, can be judged against the tile without any tint from the glass.
In laboratory catalogues a clear glass listing is often the ordinary soda-lime alternative to borosilicate, and soda-lime glass expands roughly three times as much as borosilicate when heated, which makes it less tolerant of sudden temperature change.
Where heating is part of the practical, the separately listed Erlenmeyer conical flask is the listing to compare. Graduation marks on conical flasks, where present, are approximate filling guides rather than measuring marks; volumes that count should come from a pipette, burette or measuring cylinder.
Care & Handling
- Swirl with the wrist while holding the neck, rather than shaking the flask up and down, so liquid is not thrown out.
- Set a warm flask on a heat-resistant mat and let it cool before washing; cold water on hot glass is a common cause of cracks.
- Remove titration residues promptly, especially permanganate stains, which clear far more easily while fresh.
- Discard any flask with a chipped rim or a star crack in the base, where stress concentrates during handling.
Specifications
| Item | Conical flask with flat base, sloping sides and narrow neck |
| Material | Clear glass, as named in the title; composition not stated |
| Main uses | Titration, mixing by swirling, dissolving, holding solutions |
| Heating | Gentle warming on a gauze only, until the glass type is confirmed |
Applications
- Titrating hydrochloric acid with sodium hydroxide solution, the flask standing on a white tile below the burette
- Iodine-thiosulfate and permanganate titrations, where a clear wall helps students judge a faint end point
- Rate of reaction practicals with sodium thiosulfate and acid, in which students watch a pencil cross beneath the flask disappear
- Dissolving weighed solids and mixing solutions before they are transferred to a volumetric flask
Why Choose LabEquip
Schools running class titrations need many identical flasks, and a clear body makes the end point easier for beginners to see. LabEquip supplies conical flasks within its chemistry lab equipment range; send the capacities and quantities for your practical sets through the contact page.
Related Products
- Borosilicate Conical Flask 250ml: A 250ml borosilicate conical flask for titrations that also involve heating.
- Flask, Conical (Erlenmeyer): An Erlenmeyer flask for swirl mixing, recrystallisation and liquid cultures.
- Conical Flask, Plastic: A plastic conical flask for classes where breakage is a bigger concern than heating.
- Brush, Erlenmeyer (Conical)/ Round Bottom/ Flat Bottom Flask: A bendable flask brush for cleaning inside the conical body through the narrow neck.
Frequently Asked Questions
Why is a conical flask used for titrations instead of a beaker?
Its sloping sides turn the liquid back on itself when the flask is swirled under the burette, so the solution mixes without splashing out, and the narrow neck catches drops that an open beaker would lose. The flat base stands steadily on a white tile. In clear glass, the colour change at the end point is easy to see.
Can a clear glass conical flask be heated?
Gentle warming over a gauze is fine. In labware, clear glass usually means soda-lime glass, which cracks more easily than borosilicate when heated unevenly, so avoid strong heating, direct flames and sudden temperature changes. For boiling solutions or hot plate work, a borosilicate conical flask is the safer choice.
Are the volume marks on a conical flask accurate enough for measuring?
No. Marks moulded or printed on a conical flask are only approximate guides. Measure volumes with a pipette, burette or measuring cylinder and use the flask to hold, mix and swirl them. In a titration the flask’s marks are never part of the calculation.
Why is a white tile placed under the conical flask in a titration?
The white surface reflects light up through the solution, so the first permanent colour change of the indicator, such as the faint pink of phenolphthalein, shows clearly against a plain background. It makes the end point easier to judge consistently from one titration to the next and between students.
Should the conical flask be rinsed with the solution before titrating?
No. Rinse the conical flask with distilled water only. The amount of substance in the flask is fixed by the pipetted volume, and extra water does not change it. Rinsing with the solution would leave an unmeasured extra amount in the flask. It is the pipette and burette that are rinsed with the solutions they will deliver.
How do you remove brown stains left by potassium permanganate?
The brown film is manganese(IV) oxide, which does not wash off with water. A little dilute acidified hydrogen peroxide, or an acidified solution of oxalic acid or sodium metabisulfite, reduces it to colourless manganese(II) ions that rinse away. Wear eye protection, then wash the flask normally and rinse with distilled water.
Last Updated: November 2026










Reviews
There are no reviews yet.