Quick Answer: A Liebig condenser is a water-cooled glass condenser with a straight inner tube running through an outer jacket. It is the standard condenser for simple distillation, sloping down from a still head so that condensed liquid flows into a receiver.
Straight-Tube Cooling for Distillation
The Liebig condenser is the plainest water-cooled design. Vapour passes down a straight inner tube while cold water flows through the jacket around it, entering at the lower connection and leaving at the upper one so that it runs against the vapour. Because the inner tube is straight, condensed liquid drains freely at any angle, which is why this design is the usual choice when a distillate has to be collected rather than returned to the flask.
It sits at the heart of most school and college laboratory distillation apparatus: a flask, a still head with a thermometer at the level of the side-arm, the condenser, an adapter and a receiver. It also works for reflux with gentle boiling, although a bulb or coil condenser gives more cooling for the same length. The straight tube is the easiest condenser to clean and inspect.
The word Sampling in the listing title is not explained, and the listing gives no jacket length or joint details.
Applications
- Simple distillation of water from salt solution, or of ethanol from a fermented mixture
- Solvent recovery after extractions
- Steam distillation of essential oils from plant material, paired with a steam generator
- Reflux of mixtures that boil gently, where a straight tube gives enough cooling
Specifications
| Item | Straight-tube condenser with a water jacket |
| Cooling | Water, flowing counter-current to the vapour |
| Normal position | Sloping downwards for distillation |
| Drainage | Straight tube drains freely at any angle |
Care & Handling
- Clamp the condenser at its middle, not by the side-arms, and support the receiver end.
- Start the cooling water before heating, and check that the outflow runs cool throughout the distillation.
- Drain the jacket before storage so hard-water scale does not build up and cloud the inner tube.
- Push a long brush right through the straight tube to clean it, then rinse with distilled water.
Why Choose LabEquip
Chemistry teachers and college lab managers usually order Liebig condensers with the flasks, adapters and receivers of a full distillation set. LabEquip supplies them through its chemistry lab equipment range, along with flasks such as the short neck boiling flask with interchangeable joint; send your requirements through the contact page.
Related Products
- Glass Liebig Condenser: A glass Liebig condenser with straight inner tube and water jacket, a further listing of this design.
- Receiver Adapter, Straight Delivery: A straight delivery receiver adapter that continues from the condenser outlet to the receiver.
- Condenser, Allihn: An Allihn bulb condenser with more cooling surface for reflux.
- Three Finger Condenser Clamp: A three-finger condenser clamp for holding the jacket on a stand.
Frequently Asked Questions
What is a Liebig condenser used for?
A Liebig condenser is a water-cooled glass condenser with a straight inner tube running through an outer jacket. It is the standard condenser for simple distillation, sloping down from a still head so condensed liquid flows into a receiver.
Why does a Liebig condenser have a straight inner tube?
A straight tube drains freely at any angle, so the distillate runs out instead of collecting inside. That makes the Liebig the usual choice when the condensed liquid must be collected, as in distillation.
Why does cooling water enter at the bottom of a Liebig condenser?
Water entering at the lower connection fills the jacket completely and flows against the direction of the vapour. The coldest water meets the coolest end of the vapour path, which gives the most efficient cooling.
Can a Liebig condenser be used for reflux?
Yes, fitted vertically on a flask it works for reflux, though a bulb or coil condenser gives more cooling surface in the same length. For simple school refluxes a Liebig is often sufficient.
How do you clamp a Liebig condenser safely?
Hold it with a condenser clamp around the middle of the jacket and fix the clamp to a stand rod with a boss head. Push the water tubing well onto the hose barbs and support it so its weight does not pull on the glass.
What should you check before starting a distillation with a Liebig condenser?
Make sure all joints fit and are clamped, the water is flowing in at the bottom and out at the top, the receiver is in place and the system is open to the air at the receiver end.
Last Updated: November 2026










Reviews
There are no reviews yet.