Search

In Stock

Simple Anemometer

$10.10

Quick Answer: The Simple Anemometer is a basic wind-measuring instrument for school weather studies. The product photo shows a swinging-plate design, in which a hanging plate is pushed up a curved scale by the wind, mounted with a wind vane, a direction dial and a small compass in the base.

How the Swinging-Plate Anemometer Works

Most people picture an anemometer as spinning cups, but the older swinging-plate design works differently. A flat plate hangs from a horizontal pivot at the top of the instrument. Wind pressing on the face of the plate pushes it back and up, and the stronger the wind, the higher it swings. A curved, graduated scale beside the plate shows how far it has been lifted, which is read as a measure of wind strength. The design is usually credited to Heinrich Wild, whose wind gauge was used at weather stations in the late nineteenth century.

For the plate to read correctly its face must point into the wind, which is the job of the wind vane. In the product photo the vane, with its broad tail fin and pointer, turns the head of the instrument so the plate faces the wind, while the dial below it is marked with compass directions. Aligning the dial with the compass in the base lets students read wind direction at the same time as they estimate speed.

Readings from a simple instrument like this are most useful as comparisons between days and places, or converted to the Beaufort scale.

Specifications

Instrument Simple anemometer for wind strength
Design shown in product photo Swinging plate with curved scale, wind vane, direction dial and base compass
Measures Wind strength from plate deflection; wind direction from the vane
Use Outdoors in an open, exposed position

Wind Investigations

  • Daily wind speed and direction records for a school weather station
  • Comparing wind in sheltered and exposed parts of the school grounds
  • Relating readings to the Beaufort scale and observed effects on trees and flags
  • Geography fieldwork on microclimates, with a wireless weather sensor for comparison

Setting Up and Care

  • Set the simple anemometer on a firm, level surface in the open, away from walls and trees that deflect the wind.
  • Align the direction dial with north using the compass before recording, and keep it away from steel objects that disturb the needle.
  • Bring it indoors after use and in strong winds or rain; wipe it dry before storing.
  • Check that the plate and vane swing freely before each session.

Why Choose LabEquip

Schools buy a simple anemometer to add wind to their weather records without the cost and wiring of an electronic station. LabEquip lists it with its biology lab products; for a cup-type teaching version see the anemometer model.

Related Products

  • Cup Anemometer with Analog Display: A cup anemometer with an analog readout, a rotating-cup alternative that gives steadier readings in gusts.
  • Advanced Anemometer: A handheld airflow meter for measuring air velocity at fans, ducts and openings as well as outdoors.
  • Aneroid Barometer: An aneroid barometer for adding air pressure readings to the class weather record.
  • Sling Psychrometer: A sling psychrometer for measuring relative humidity alongside wind at the same weather station.
  • Simple Compass: A simple magnetic compass for checking north before aligning the direction dial.

Frequently Asked Questions

How does a swinging-plate anemometer measure wind speed?

A flat plate hangs from a pivot at the top of the instrument. Wind pressing on its face pushes it back and up along a curved scale, and the stronger the wind, the higher it swings. The reading is taken where the edge of the plate sits on the scale.

How is a swinging-plate anemometer different from a cup anemometer?

A cup anemometer has a rotor of cups that spins faster as the wind strengthens, and the rotation is counted or shown on a dial. A swinging-plate type has no rotating parts: it shows wind strength by how far the plate is lifted. It is simple and robust, while cup models give steadier readings in gusty wind.

How do I set the anemometer up to read wind direction?

Use the compass in the base to turn the instrument until the north mark on its direction dial points to magnetic north. The wind vane then swings to point into the wind, and the dial shows the direction the wind is coming from. Keep steel objects away from the compass while aligning.

Why is wind named by the direction it comes from?

Meteorologists describe wind by its source, so a north wind blows from the north towards the south. The vane points into the wind, toward its source, which is why the reading on the dial gives the wind’s name directly.

Where should a school anemometer be placed?

Place it in an open, exposed spot away from buildings, walls and trees, which slow the wind and make it swirl. A post or roof position well above ground level gives readings closer to the free wind; readings taken near the ground or in a courtyard will be lower.

Why does the plate keep swinging in gusty wind, and how do I read it?

Wind speed changes from second to second, so the plate rises and falls with every gust and lull. Watch it for about a minute and record the typical level, and note the highest swing separately as the gust. Take readings at the same time each day for comparison.

Last Updated: November 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)