Quick Answer: The Advanced Anemometer is a handheld airflow meter for measuring the velocity of moving air at fans, blower outlets, ducts and ventilation openings. Beyond outdoor wind readings, an advanced anemometer is used in physics and engineering laboratories to measure airflow and work out volume flow rates.
Measuring Airflow Rather Than Weather
Indoor airflow is very different from wind. It comes from a fan, duct or opening, it varies sharply across the outlet, and it is often turbulent close to the source. Measuring it properly means placing the sensor at defined points, holding it square to the flow and averaging. A vane or similar sensor is held directly in the air stream with its face perpendicular to the direction of flow; tilting it by even a modest angle lowers the reading.
Because the speed differs from the centre of an opening to its edges, a single reading is rarely representative. Engineers use a traverse: the opening is divided into a grid of equal areas, a reading is taken at the centre of each, and the average is used. Multiplying that average speed by the area of the opening gives the volume flow rate, the quantity that matters for ventilation and fan performance.
Features to Check
Instruments sold as advanced anemometers differ in what they add: some show air temperature, some calculate flow from an entered area, some hold maximum or average readings. Those functions, the sensor type and the display units of this model should be confirmed before ordering, so the meter suits the measurements planned.
Laboratory Uses
- Measuring the air speed from a laboratory air blower at different distances
- Calculating volume flow through vents and ducts in ventilation studies
- Checking the airflow of fans and extraction openings
- Comparing fan settings or blade designs in engineering projects
Specifications
| Measures | Velocity of moving air |
| Form | Handheld meter with airflow sensor |
| Method | Sensor perpendicular to flow; traverse and average across an opening |
| Derived quantity | Volume flow rate = average velocity x area |
| Sensor type, extra functions and units | Confirm at enquiry |
Care & Handling
- Hold the sensor square to the airflow and keep fingers out of the air path.
- Avoid very dusty, oily or wet air streams unless the meter is made for them.
- Keep the sensor in its protective cover or case when not in use.
- Replace weak batteries promptly, as low supply voltage can affect digital readings.
Why Choose LabEquip
Engineering colleges and physics departments that study fluid flow choose an airflow meter of this kind over a simple weather anemometer. LabEquip lists it among its physics equipment next to the classroom wind speed meter, and model features can be confirmed through the contact page.
Frequently Asked Questions
How is this different from a weather anemometer?
A weather anemometer measures outdoor wind at one point. An airflow anemometer is used close to fans, ducts and outlets, where speed varies across the opening and readings must be averaged to find the flow.
How do I calculate the volume of air flowing through a vent?
Measure the air speed at several evenly spaced points across the vent, average the readings, and multiply by the area of the vent opening. The result is the volume of air per second.
Why should the sensor face the flow squarely?
If the sensor is tilted, only part of the airflow passes straight through it and the reading falls. Holding it perpendicular to the flow gives the true speed.
Why do readings near a fan fluctuate?
Air leaving a fan swirls and is turbulent close to the blades. Measure a little further away or average over time to get a steady value.
Can the anemometer check a fume cupboard?
It can measure the speed of air entering the sash opening, which is how face velocity is assessed. The required values and test method should follow the laboratory’s own safety procedures.
What units are used for airflow speed?
Metres per second is the usual scientific unit; feet per minute is common in ventilation work. Volume flow is given in cubic metres per second or per hour.
Last Updated: October 2026










Reviews
There are no reviews yet.