Quick Answer: The Ten Metal Collection is a set of ten real metal specimens that students can hold and test side by side, comparing colour, lustre, density, magnetism and how well each conducts heat. It turns the textbook list of metallic properties into observations made on actual samples.
Why Real Specimens Beat a Table of Properties
A table can say that aluminium is light and lead is heavy, but a student who picks up two similar-sized pieces feels the difference immediately. The ten metal collection gives a class ten such comparisons at once. Colour separates copper and brass-type alloys from the grey and silver metals; lustre shows on freshly cleaned faces and fades where a sample has oxidised; and a simple magnet test divides the set sharply into the few metals that are attracted and the many that are not.
That magnet test is often the most useful lesson in the box, because many students assume every metal sticks to a magnet. Iron, nickel and cobalt and most steels are attracted; aluminium, copper, zinc, tin, lead and brass are not. With a balance and a measuring cylinder the same specimens can also be used for density measurements, and the calculated values can be checked against published figures to identify an unknown sample.
Specifications
| Contents | Ten metal specimens |
| Properties observable | Colour, lustre, relative density, magnetic behaviour, feel of heat conduction |
| Used with | Magnet, balance, measuring cylinder, simple conductivity circuit |
| Level | Middle school to senior secondary science and chemistry |
Classroom Uses
- Sorting metals into magnetic and non-magnetic groups with a bar or horseshoe magnet
- Measuring mass and volume by displacement to calculate density
- Showing that all metals conduct electricity using a cell, bulb and leads
- Comparing tarnished and freshly cleaned surfaces to discuss oxidation and corrosion
- Identifying an unknown sample from its measured density and appearance
Care & Handling
- Wash hands after handling the specimens, and do not let younger students put samples near their mouths.
- Keep the set dry and in its box or tray so that iron-based samples do not rust and labels stay with the right metal.
- Do not heat the specimens or place them in acids unless the teacher has planned a specific experiment, since some metals react or melt easily.
Why Choose LabEquip
Science departments often keep one metal collection per bench group for properties-of-materials lessons. LabEquip lists this set in its Astronomy Lab Kits section; for the magnetism test, the Horseshoe Magnet does the job well. Ask about the specimen list and quantities through LabEquip’s contact page.
Related Products
- Twenty Metal Sample Collection: A larger collection of twenty metal samples for extending the comparison to more metals.
- Horseshoe Magnet, Alnico: An Alnico horseshoe magnet for sorting the specimens into magnetic and non-magnetic groups.
- Measuring Cylinder 50ml: A 50 ml measuring cylinder for finding each specimen’s volume by water displacement.
- Alloys Set, Collection of 20 Alloys: A set of alloys for comparing the properties of mixed metals with those of pure metals.
Frequently Asked Questions
Which metals in a metal collection are attracted to a magnet?
Iron, nickel, cobalt and most steels are attracted to a magnet. Aluminium, copper, zinc, tin, lead and brass are not. Testing each specimen with a bar or horseshoe magnet quickly corrects the common idea that all metals are magnetic.
How do you measure the density of a metal specimen?
Weigh the specimen on a balance to find its mass. Then lower it into a measuring cylinder partly filled with water and read the rise in water level, which is its volume. Density is mass divided by volume, in g per cubic centimetre, and can be compared with published values.
Why do some metal samples look dull instead of shiny?
Many metals react slowly with oxygen and moisture in the air and form a thin layer of oxide or tarnish that hides their natural lustre. A freshly rubbed area shows the true shine underneath. Comparing which samples tarnish fastest gives a simple reactivity discussion.
Why do metals feel colder than wood at the same temperature?
Both are at room temperature, but metals conduct heat away from your hand much faster than wood does. Your skin senses the rate of heat loss, not the temperature itself, so the metal feels colder. It is a direct way to show that metals are good thermal conductors.
How can students test whether each metal conducts electricity?
Build a simple circuit with a cell, a bulb or buzzer and two leads with crocodile clips. Clip each specimen into the gap: if the bulb lights, the sample conducts. All ten metals should conduct, while materials such as wood or plastic do not.
Are metal specimens safe for students to handle?
For normal handling, yes, with simple precautions: wash hands after use, especially if the set contains lead, and do not put specimens in the mouth. Keep sharp edges in mind and return each sample to its place after the lesson.
Last Updated: November 2026










Reviews
There are no reviews yet.