Quick Answer: A Kjeldahl distillation assembly is the glass set-up used in the second stage of the Kjeldahl method, where a digested sample is made alkaline and its ammonia is distilled into a receiving acid. The amount of ammonia collected gives the nitrogen, and from that the protein, content of foods, feeds, soils and fertilisers.
From Digest to Distillate
After digestion in hot concentrated sulfuric acid, the nitrogen of the sample is held as ammonium sulfate in a strongly acidic solution. The distillation stage releases it. The cooled digest is diluted, concentrated sodium hydroxide solution is added in excess, and the ammonia set free is boiled over through a splash-head trap into a condenser. The condensed distillate runs into a flask of boric acid or standard acid, where the ammonia is held for titration.
A macro assembly of this kind is built around the long-necked Kjeldahl flask, so digestion and distillation can take place in the same vessel. The splash head, often a bulb with an inner tube, is essential: the strongly alkaline mixture foams and spits as it boils, and any droplets reaching the receiver would neutralise acid there and inflate the result. The condenser outlet ends in a delivery tube that dips into the receiving solution.
For smaller samples and faster distillations by steam, see the micro Kjeldahl nitrogen distillation apparatus.
Specifications
| Method stage | Distillation of ammonia after acid digestion |
| Typical parts | Kjeldahl flask, splash-head trap, condenser, delivery tube, receiver |
| Reagents used | Excess sodium hydroxide in the flask; boric or standard acid in the receiver |
| Result | Nitrogen by titration, converted to crude protein with a factor |
Applications
- Crude protein determination in cereals, pulses, milk powder and animal feed
- Total nitrogen in soils and organic manures in agricultural laboratories
- Nitrogen content of fertilisers such as urea and ammonium salts
- Food chemistry and biochemistry practicals in university and pharmacy courses
Care & Handling
- Add the sodium hydroxide slowly down the neck so it forms a layer under the digest, and connect the assembly before swirling to mix.
- Check that the receiver tube dips into the acid before heating starts, and lift it out of the liquid before heating stops.
- Add a few granules of zinc or anti-bumping chips to calm the violent boiling of the alkaline mixture.
- Rinse the condenser and delivery tube into the receiver at the end, then flush the assembly with water before the next sample.
Why Choose LabEquip
Food testing, feed and soil laboratories that run the Kjeldahl method on batches of samples need assemblies that can be duplicated along a bench. LabEquip offers the assembly under chemistry lab equipment; give the flask size and number of units through the contact page.
Related Products
- Flask, Kjeldahl: The long-necked Kjeldahl flask in which the sample is digested and then distilled in this assembly.
- Micro Kjeldahl Nitrogen Distillation Apparatus: A micro Kjeldahl steam-distillation unit for small aliquots instead of the whole digest.
- Distillation Apparatus, Ammonia: An ammonia distillation apparatus that also handles ammoniacal nitrogen in water and wastewater.
- Distillation Assembly, Steam: A steam distillation assembly, the technique the micro method uses to sweep ammonia over.
Frequently Asked Questions
Why is so much sodium hydroxide added before Kjeldahl distillation?
After digestion the nitrogen is held as ammonium sulfate in strongly acidic solution. Enough concentrated sodium hydroxide must be added to neutralise all the remaining sulfuric acid and make the mixture strongly alkaline. Only then is ammonia set free from its ammonium salt so it can be boiled over into the receiver.
What is the purpose of the splash head in a Kjeldahl distillation assembly?
The strongly alkaline digest foams and spits as it boils. The splash head, often a bulb with an inner tube, traps those droplets and returns them to the flask. Without it, alkali would be carried into the condenser and receiver, neutralising some of the receiving acid and giving a falsely high nitrogen result.
Is boric acid or standard acid better in the Kjeldahl receiver?
With boric acid, the ammonia is captured as borate and titrated directly with standard acid, so the boric acid strength need not be exact. With a measured excess of standard acid, the unreacted acid is back-titrated with standard alkali. Boric acid needs one fewer standard solution, which is why many labs prefer it.
How do I know when Kjeldahl distillation is complete?
Methods specify a volume of distillate to collect or a set time. A practical check is to test a fresh drop from the condenser with red litmus or the receiver’s indicator; when it no longer shows alkali, ammonia has stopped coming over. Lower the receiver before stopping heat to avoid suck-back.
Why run a reagent blank in the Kjeldahl method?
The sulfuric acid, catalyst, sodium hydroxide and water can all contain traces of nitrogen. Running the whole method without a sample measures that background, and subtracting the blank titre from the sample titre gives the nitrogen that came from the sample alone.
What is the difference between macro and micro Kjeldahl distillation?
The macro method distils the whole digest from the Kjeldahl flask by direct heating, suiting larger samples. The micro method uses a small portion of the digest in a compact steam-distillation unit, which is quicker, uses less reagent and suits small samples with milligram amounts of nitrogen.
Last Updated: November 2026










Reviews
There are no reviews yet.