Search

In Stock

Flask, Kjeldahl

High-Elongated Neck Design: Features a precision-calibrated neck to maximize the internal reflux surface area, ensuring safe containment of corrosive vapors during high-temperature organic decomposition.

Borosilicate 3.3 Composition: Fabricated from Type I Class A borosilicate glass, providing a low coefficient of expansion and maximum durability against concentrated sulfuric acid and catalysts.

₹388.00

Quick Answer: A Kjeldahl flask is a round-bodied glass flask with a long, wide neck, used to digest organic samples in hot concentrated sulfuric acid during the Kjeldahl method for nitrogen and protein. The long neck is set at an angle during heating so that acid vapour condenses and runs back into the bulb.

The Kjeldahl Method in Three Steps

Johan Kjeldahl published his method for determining nitrogen in 1883, and it is still used to estimate protein in foods, feeds, fertilisers and soils. The sample is first digested in concentrated sulfuric acid with a catalyst and a salt such as potassium sulfate, which raises the boiling point, so that organic nitrogen is converted to ammonium sulfate. The digest is then made alkaline and the released ammonia is distilled into a measured quantity of acid, which is finally titrated to find how much nitrogen the sample contained.

The Kjeldahl flask is the vessel for the first, digestion stage. Its pear or round bulb holds the sample and acid, and its long neck, tilted at roughly 45 degrees in a digestion rack or over a burner, acts as an air condenser: acid vapour and water condense on the cooler upper neck and drain back, which limits acid loss during long heating. In many laboratories the same flask is then connected to a distillation unit for the ammonia step.

Crude protein is estimated by multiplying the nitrogen found by a conversion factor, conventionally 6.25 for general foods and feeds, with other factors used for some products such as milk and cereals.

Applications

  • Estimating crude protein in food, feed and grain samples in college and food-testing laboratories
  • Measuring total nitrogen in soils and fertilisers in agricultural science practicals
  • Teaching digestion, distillation and titration as linked analytical steps
  • Wet oxidation of organic matter with acid before some elemental analyses

Care & Handling

  • Digest in a fume cupboard or under a fume extraction manifold; hot sulfuric acid gives off dense, corrosive white fumes.
  • Let the digest cool fully before adding water, then add the water slowly with swirling, because concentrated sulfuric acid releases a great deal of heat on dilution.
  • Use anti-bumping granules during digestion and distillation to prevent violent boiling.
  • Inspect the neck for cracks after each run, since repeated strong heating and cooling stresses the glass.

Specifications

Item Long-necked digestion flask for the Kjeldahl method
Bulb Round or pear-shaped body to hold sample and acid
Neck Long neck that acts as an air condenser when tilted
Method stage Acid digestion; often reused for ammonia distillation

Why Choose LabEquip

Food, agriculture and dairy science departments, along with quality-control laboratories that test protein, are the main buyers of Kjeldahl flasks. For digestion racks of a given size, share the capacity and number of places on the contact page; the flask is supplied from LabEquip’s chemistry lab equipment section.

Related Products

Frequently Asked Questions

Why does a Kjeldahl flask have such a long neck?

The long, wide neck works as an air condenser. When the flask is tilted during digestion in hot concentrated sulfuric acid, acid vapour condenses on the cooler neck and runs back into the bulb instead of escaping. That keeps the acid volume steady and limits fumes while the organic sample is broken down.

At what angle should a Kjeldahl flask be held during digestion?

The flask is tilted at roughly 45 degrees in a digestion rack or clamp, as described on this page. The slope keeps any spitting liquid inside the bulb, lets condensed acid run back down the neck, and stops heat from the burner or heater reaching the upper neck directly.

What happens to the sample inside a Kjeldahl flask?

The sample is heated with concentrated sulfuric acid, a catalyst and a salt such as potassium sulfate, which raises the boiling point. Organic matter is oxidised and its nitrogen is converted to ammonium sulfate. The cleared digest then goes on to the distillation stage, where the ammonia is released and measured.

How is protein worked out from a Kjeldahl nitrogen result?

The titration gives the mass of nitrogen in the sample. Multiplying the percentage of nitrogen by a conversion factor gives crude protein; 6.25 is the general factor, based on proteins containing about 16 percent nitrogen, and other factors are used for specific foods such as milk or cereals.

Can the same Kjeldahl flask be used for the distillation step?

In the macro method it often is. After digestion and cooling, the digest is diluted in the same flask, made alkaline and connected to a splash head and condenser, so the sample is never transferred and nothing is lost. A Kjeldahl distillation assembly is built around this long-necked flask.

What safety precautions does Kjeldahl digestion need?

Digestion gives off dense sulfuric acid fumes, so it must run in a fume cupboard or under a fume extraction manifold, with face shield, gloves and lab coat. Let the flask cool before adding water, and add water slowly to the cooled digest, never the other way round, because diluting concentrated acid releases a lot of heat.

Last Updated: November 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)