Quick Answer: This air cushion blower is the air supply for air-cushion mechanics apparatus. It delivers a large, steady flow of air at low pressure through a hose to an air track, an air table or air-cushion pucks, so that gliders ride on a thin film of air and move with very little friction.
What the Blower Does
Friction hides the laws of motion. A trolley on a bench slows down so quickly that students conclude a force is needed to keep things moving. An air-cushion system removes most of that friction: air from the blower escapes through rows of small holes, or through the base of a puck, and forms a cushion that lifts the glider clear of the surface. With contact friction gone, the only resistance left is a slight drag from the air itself, and a glider pushed once travels the length of the track at an almost steady speed.
The unit is an air supply only. It does not produce a test-section airflow for studying models in moving air; its job is to feed the cushion under gliders and pucks.
Low Pressure, Large Flow
Lifting a glider needs surprisingly little pressure. A 0.2 kg glider resting on an air film of area 0.02 m² needs an excess pressure of only mg/A ≈ 1.96 N ÷ 0.02 m² ≈ 98 Pa, about one thousandth of atmospheric pressure. What it does need is a continuous flow, because the air leaks out round the edges all the time. That is why a blower, which moves a large volume of air at low pressure, is used rather than a compressor, which produces high pressure but a small flow.
Specifications
| Item | Blower (air supply) for air-cushion apparatus |
| Feeds | Air tracks, air tables and air-cushion pucks through a hose |
| Principle | Low-pressure, high-volume flow forming a supporting air film |
| Effect | Near-frictionless motion of gliders and pucks |
| Electrical supply, flow control and hose fitting | Confirm at enquiry |
Experiments It Supports
- Newton’s first law: a glider moving at constant velocity on a level track
- Collisions and conservation of momentum between gliders or pucks
- Acceleration of a glider pulled by a falling mass over a pulley
- Two-dimensional collisions of pucks on an air table
Care & Handling
- Keep the air intake clear of paper, dust and cloth; a blocked intake starves the cushion and makes the motor run hot.
- Switch the blower on before placing a glider on the track, and lift the glider off before switching off, so the surfaces never grind together.
- Check the mains lead and plug before each session and keep the blower on a stable surface away from water.
- Do not run it with the outlet sealed for long periods; let the air flow freely through the apparatus.
Why Choose LabEquip
Schools and colleges that run air tracks or air tables need a dedicated air supply for each set-up, and this blower is the part that makes those experiments work. LabEquip lists it with the air-cushion puck and the air track apparatus in its physics lab equipment range. Use the contact page to match the blower’s hose fitting to your apparatus.
Frequently Asked Questions
Why does an air track need a blower rather than a compressor?
The air cushion needs only a small excess pressure but a continuous, large flow, because air escapes round the gliders all the time. A blower gives exactly that, while a compressor produces high pressure at a small flow rate.
How much pressure is needed to lift a glider?
Divide the glider’s weight by the area of the air film. A 0.2 kg glider on 0.02 m² needs about 98 Pa above atmospheric pressure, which is less than one thousandth of an atmosphere.
What happens if the air flow is too weak?
The glider touches the track in places, friction returns and the glider slows unevenly. Check that the intake is clear, the hose is not kinked and the holes along the track are not blocked by dust.
Can one blower feed more than one piece of apparatus?
Splitting the flow lowers the pressure available to each outlet, and long or narrow hoses lose more. It is more reliable to run one blower per track or table, matched to the apparatus it serves.
How should gliders be placed and removed?
Start the blower first and then set the glider on the track, so it lands on the cushion. At the end, lift the glider off before switching off. This prevents scratches that would spoil the air film.
Is the blower noisy in class?
Like any blower it produces a steady hum. Standing it on a rubber mat, under the bench where the hose allows, and switching it off between runs keeps the noise down while the teacher is explaining.
Last Updated: October 2026










Reviews
There are no reviews yet.