Quick Answer: The Weight, 20Kg, Class F1 is a single 20 kg reference weight titled in accuracy class F1. Laboratories use a 20 kg F1 weight to test high-capacity precision balances near the top of their range, where the reference must be both heavy and very close to its nominal value.
Handling a 20 kg Reference Safely
A 20 kg weight can injure the person lifting it and damage a balance if it slips. Lift it close to the body with bent knees and a straight back, or use a lifting aid; move it between rooms on a trolley with a raised edge rather than carrying it. When placing it, bring it level with the pan first and lower it vertically onto the centre, never swinging it in from above.
Weights of this size are made either as cylinders with a knob or as rectangular blocks with a handle, and the grip each offers is different. The form of this weight, and any lifting accessory to go with it, can be confirmed at enquiry.
Cleaning Without Changing the Mass
Dust is removed with a soft brush and a dry, lint-free cloth. Fingerprints leave grease and moisture, which is why reference weights are handled with gloves at all times. If a solvent such as alcohol has to be used to remove stubborn contamination, the weight must be left to stabilise afterwards before it is used, because traces of solvent and moisture evaporate only slowly. Abrasive pads and polishes are never used, since they remove metal.
Taking the Weight to Another Site
Calibration engineers often carry heavy references to the balance rather than the other way round. The weight travels in a padded, closed case, is inspected for knocks on arrival, and is left in the room with the balance until it has reached the same temperature. A large weight changes temperature slowly, so this wait is longer than for small pieces.
Specifications
| Nominal value | 20 kg, as titled |
| Accuracy class | F1, as titled |
| Supplied as | Single individual weight |
| Handling | Gloves, with a trolley or lifting aid recommended |
| Shape, material, handle or knob and calibration documents | Confirm at enquiry |
Applications
- Upper-range span tests on high-capacity precision balances
- Repeatability tests at heavy load on floor-standing and bench balances
- Reference for calibrating 20 kg M-class weights by comparison
- On-site calibration visits where the reference is carried to the balance
Care & Handling
- Wear clean gloves whenever the 20 kg F1 weight is handled.
- Move it on a trolley with a raised edge and keep it on a low, sturdy shelf.
- Clean only with a soft brush and lint-free cloth; allow time to stabilise after any solvent cleaning.
- Inspect it after transport and send it for recalibration after any knock or drop.
Why Choose LabEquip
Pharmaceutical plants, calibration services and research labs with high-capacity balances buy a 20 kg F1 weight when the top of the range must be tested properly. LabEquip lists it in its Physics Equipments range; the 10 kg F1 weight can be paired with it for intermediate test points. Send your balance capacity and readability through the contact page.
Frequently Asked Questions
Can one person lift a 20 kg weight safely?
Many adults can with good technique, but workplace guidance often favours lifting aids or two people for repeated lifts. Using a trolley for moving the weight and lifting only for the short final placement reduces the strain.
How do I clean a 20 kg reference weight?
Brush off dust and wipe with a dry, lint-free cloth while wearing gloves. Use a solvent only when contamination will not come off otherwise, and then let the weight stabilise before using it.
Why does a dropped weight need recalibration even if it looks undamaged?
A dent displaces material, a small chip removes it, and a jolt can loosen the seal of an adjusting cavity. None of these may be obvious, so the only safe course is to recalibrate before trusting the weight again.
How should the weight be moved between laboratories?
In a closed, padded case on a trolley, then left beside the balance until it reaches room temperature. Check it for damage on arrival and note the move in its log.
Is a 20 kg F1 weight needed for an ordinary bench scale?
Usually not. F1 is aimed at precision balances with fine resolution at high load. For bench scales with coarser intervals, an F2 or M1 weight of the same value is normally adequate.
Why do heavy weights take longer to reach room temperature?
A large weight stores much more heat for each square centimetre of surface through which it can exchange heat with the air, so its temperature changes slowly. Until it settles, air currents around it disturb the balance reading.
Last Updated: October 2026










Reviews
There are no reviews yet.