Search

In Stock

Wave tank

Cuve à ondes élève, High-Contrast Optical Projection Mirror enables the technical Analysis of stationary wave patterns and phase shifts on the integral projection screen, reinforcing evidentiary-grade reporting.

Modular Refractive Obstacles and Dippers support the Evaluation of Snell's Law and wave-front deformation in varying media densities, fostering critical understanding of Huygens-Fresnel principles.

₹11,204.00

Quick Answer: A ripple tank, also called a wave tank, is a shallow, transparent-bottomed tray of water lit so that ripples on the surface are projected as bright and dark lines onto a screen. School physics uses the ripple tank to show reflection, refraction, diffraction and interference of waves.

How the Tank Makes Waves Visible

Each ripple on the water surface acts as a weak lens. A crest focuses the light passing through it and a trough spreads it, so a lamp shining through the tank throws a pattern of bright and dark bands onto a screen or a sheet of white paper. The bands are the wavefronts, and their spacing on the screen is the wavelength, scaled up slightly by the projection geometry.

Waves are started by a dipper touching the surface: a straight bar makes plane waves, and a small ball makes circular waves spreading from a point. A single touch gives a pulse, while a vibrating dipper gives a continuous train. Water depth is the main control on wave speed, since in a tank this shallow the waves travel more slowly where the water is shallower.

Classic Experiments

Reflection is shown by placing a straight barrier in the path of plane waves and comparing the angles; a curved barrier brings plane waves to a focus, modelling a concave mirror. Refraction needs a region of shallower water, usually made by laying a flat glass or plastic plate on the bottom: the waves slow down over it, their wavelength shortens, and if they arrive at an angle they change direction.

Diffraction appears when plane waves pass through a gap between two barriers. A gap about as wide as the wavelength spreads the waves widely, and a much wider gap lets them through with little spreading. Two dippers vibrating together produce interference, with lines of calm water radiating between lines of strong waves, the water-wave version of Young’s double-slit experiment. A stroboscope, where available, makes the moving pattern appear still so that the wavelength can be measured.

Specifications

Item Ripple tank (wave tank) for water-wave demonstrations
Principle Ripples act as lenses and project the wavefronts onto a screen
Wave sources Plane and point dippers
Shows Reflection, refraction, diffraction and interference
Used with Lamp, screen, barriers, shallow-water plate, stroboscope
Size, light source and included accessories Confirm at enquiry

Applications

  • Measuring the wavelength and speed of water waves
  • Demonstrating the law of reflection with straight and curved barriers
  • Showing refraction at a boundary between deep and shallow water
  • Investigating how gap width affects diffraction
  • Producing two-source interference patterns

Care & Handling

  • Level the tank before filling so the water depth is the same everywhere
  • Keep mains-powered lamps and vibrators clear of spilled water, and dry hands before touching switches
  • Empty, rinse and dry the tank after use to prevent residue and algae
  • Wipe the transparent floor with a soft cloth, as scratches show up in the projected image

Why Choose LabEquip

Schools and teacher-training colleges buy a ripple tank as the standard way to teach wave behaviour visually. LabEquip also lists an LED ripple tank kit and a tank driven by an electromagnetic vibrator, so the tank can be matched to how much measurement your syllabus asks for; compare them in the physics lab equipment range or ask through LabEquip contact.

Frequently Asked Questions

Why does the tank show bright and dark lines?

Each crest acts like a converging lens and each trough like a diverging one, so light passing through the water is concentrated under the crests and spread out under the troughs.

How do I show refraction in the tank?

Lay a flat glass or plastic plate on the bottom to make a shallow region. Waves slow down over it, their wavelength shortens, and waves meeting its edge at an angle change direction.

Why are the waves slower in shallow water?

In this tank the water is shallow enough that its depth controls the wave speed. The shallower the water, the more the motion of the water is held back by the bottom, and the slower the waves.

What gap width gives the most diffraction?

Spreading is greatest when the gap is similar to the wavelength. Much wider gaps let the waves through with only slight spreading at the edges.

Why use a stroboscope?

Ripples move too fast to measure by eye. A stroboscope flashing at the wave frequency makes the pattern appear stationary, so the wavelength can be measured on the screen.

How deep should the water be?

A shallow layer of a few millimetres is usual, and it must be the same across the tank. Uneven depth makes waves bend unexpectedly because their speed changes.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)