Search

In Stock

U-Shaped Magnet, Alnico

High-Coercivity Alnico Alloy: Cast from a premium Aluminum-Nickel-Cobalt composition, this magnet exhibits exceptional thermal stability and resistance to demagnetization, maintaining a consistent magnetic moment across a wide operating temperature range (up to 525°C).

Parallel-Pole Flux Concentration: The precision-machined U-geometry minimizes flux leakage compared to bar magnets and includes a matched soft-iron keeper, which completes the magnetic circuit to prevent atmospheric self-demagnetization during long-term storage.

₹274.00

Quick Answer: The U-Shaped Magnet, Alnico, is a permanent magnet made of Alnico alloy and bent into a U, so that its north and south poles face each other across a gap. A U-shaped Alnico magnet provides a strong field across that gap for experiments on the force on a current and on electromagnetic induction.

Why the Gap Between the Poles Matters

Bending a magnet into a U brings its two poles side by side, and the field lines run straight across the gap from one pole face to the other. In the middle of the gap the field is strong and roughly uniform in direction, which is exactly what experiments on the motor effect need: a wire or coil placed there lies in a field whose direction is known and does not change much from one side of the wire to the other.

Alnico is an alloy of aluminium, nickel and cobalt with iron. It is one of the strongest of the traditional magnet materials and keeps its magnetism at higher temperatures than most others. Its weakness is that it can be partly demagnetised by a strong opposing field or by repeated knocks, so a soft iron keeper should be placed across the poles whenever the magnet is put away.

Experiments with a U-Shaped Magnet

  • Demonstrating the force on a current-carrying conductor and Fleming’s left-hand rule
  • Showing the field pattern across the gap with iron filings or plotting compasses
  • Inducing a current by moving a wire or coil through the gap
  • Building a simple current balance or catapult-field demonstration

Showing the Force on a Current

In a classic set-up, a short loose copper rod rests on two horizontal rails that pass through the gap of the U-shaped Alnico magnet. When a current from a low-voltage supply flows through the rails and rod, the rod rolls along the rails. Reversing either the current or the magnet reverses the motion, and Fleming’s left-hand rule predicts the direction each time.

The same gap serves for induction. Moving a straight wire connected to a sensitive galvanometer down through the gap produces a brief current, and moving it up produces a current the other way. The faster the movement, the larger the deflection.

Specifications

Type U-shaped permanent magnet
Material Alnico (aluminium-nickel-cobalt-iron alloy)
Poles Side by side at the open ends, facing across a gap
Keeper Used across the poles in storage
Size, gap width and finish Confirm at enquiry

Care & Handling

  • Always replace the keeper across the poles after use.
  • Do not drop the magnet or knock it against steel; shocks reduce Alnico magnetism.
  • Keep it away from other magnets with like poles facing, which can partly demagnetise it.
  • Store away from watches, phones, bank cards and computer equipment.

Why Choose LabEquip

Physics departments buy U-shaped Alnico magnets for electromagnetism practicals where a strong, steady field across a gap is required. For contrast, the Alnico horseshoe magnet has curved limbs, and both are listed in LabEquip’s physics equipment category. Class sets can be arranged through the contact page.

Frequently Asked Questions

Why is a U-shaped magnet used instead of a bar magnet for the motor effect?

A U-shaped magnet brings both poles together, so the field crosses the gap between them in one main direction. A wire placed in that gap lies in a strong, fairly uniform field, which a single bar magnet cannot provide.

What is Alnico?

Alnico is a magnet alloy made mainly of aluminium, nickel and cobalt with iron. It gives strong, stable magnets that tolerate higher temperatures, but it needs a keeper to protect it from demagnetising fields.

What is the keeper for?

The keeper is a piece of soft iron laid across the poles. It gives the field lines an easy path from pole to pole, which protects the magnet from losing strength while it is stored.

How do I use Fleming’s left-hand rule with this magnet?

Hold the thumb and first two fingers of the left hand at right angles. Point the first finger along the field from north to south, the second finger along the current, and the thumb shows the direction of the force.

Can the magnet be used to induce a current?

Yes. Connect a wire or small coil to a sensitive galvanometer and move it quickly through the gap between the poles. The needle kicks one way as the wire enters and the other way as it leaves.

How can students tell which pole is north?

Hang the magnet from a thread so it can turn freely, or bring it near a compass. The end that attracts the south-seeking end of the compass needle is the north pole; many magnets are also marked or painted at one end.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)